HP Z22i manual Connecting the Cables

Page 11

Connecting the Cables

1.Place the monitor in a convenient, well-ventilated location near the computer.

2.Remove the cable management clip from the back of the stand by pressing inward on one side of the clip (1) and pulling outward on the other side of the clip (2)

3.Depending on your configuration, connect either the DisplayPort, DVI, or VGA video cable between the PC and the monitor.

NOTE: The monitor is capable of supporting either analog or digital input. The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the Input button on the front panel or through the On-Screen Display (OSD) feature by pressing the Menu button.

●For analog operation, connect the VGA signal cable to the VGA connector on the rear of the monitor and the other end to the VGA connector on the computer (cable provided with select models).

Connecting the Cables

5

Page 10 Page 12
Image 11
Page 10 Page 12
Contents HP Z22i and Z23i IPS Displays First Edition March Document Part Number About This Guide Iv About This Guide Table of contents Page HP IPS Monitors Product FeaturesPage Unfolding the Monitor Setting Up the MonitorComponent Function Rear ComponentsConnecting the Cables Page Page Page Control Function Front Panel ControlsAdjusting the Monitor Page Turning on the Monitor HP Watermark and Image Retention Policy Connecting USB Devices Removing the Monitor Stand Mounting the Monitor Locating the Rating Labels Installing a Cable LockProduct Support Finding More InformationReference Guides Z23i Model Technical SpecificationsZ22i Model Z22i Model Recognizing Preset Display ResolutionsZ23i Model Entering User ModesEnergy Saver Feature
Top Page Image Contents