HP Z22i manual Mounting the Monitor

Page 22

Mounting the Monitor

The monitor panel can be attached to a wall, swing arm, or other mounting fixture.

NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.

1.Remove the monitor panel from the stand. Refer to Removing the Monitor Stand on page 15.

CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required. Longer screws must not be used because they may damage the monitor. It is important to verify that the manufacturer’s mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cables provided with the monitor.

2.To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor.

To attach the monitor to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.

3.Reconnect the cables to the monitor panel.

16 Chapter 2 Setting Up the Monitor

Image 22
Contents HP Z22i and Z23i IPS Displays First Edition March Document Part Number About This Guide Iv About This Guide Table of contents Page Product Features HP IPS MonitorsPage Setting Up the Monitor Unfolding the MonitorRear Components Component FunctionConnecting the Cables Page Page Page Front Panel Controls Control FunctionAdjusting the Monitor Page Turning on the Monitor HP Watermark and Image Retention Policy Connecting USB Devices Removing the Monitor Stand Mounting the Monitor Installing a Cable Lock Locating the Rating LabelsReference Guides Finding More InformationProduct Support Z22i Model Technical SpecificationsZ23i Model Recognizing Preset Display Resolutions Z22i ModelEntering User Modes Z23i ModelEnergy Saver Feature