HP w1858 18.5-inch manual Preparing the cantilever-base monitor for wall-mounting, Preparation

Page 15

Setting Up the Monitor

Preparing the cantilever-base monitor for wall-mounting

1.Disconnect the power cable and any other cables from the monitor.

2.Remove the monitor base. Keep the monitor panel screen down on a flat, soft area.

3.After the base is removed, remove the rubber plug on the neck of the monitor. You will see a screw below the rubber plug and two additional screws on the panel.

4.Remove all three screws.

5.Remove the neck from the monitor.

6.Save the removed items (rubber plug, screws, neck, and base) for future use.

7.Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.

The four-threaded mounting holes that are on the back of the panel are compliant with the VESA standard for mounting flat-panel monitors.

Use the four holes to attach a swing arm or other mounting fixture.

Wall-mounting the double-hinged monitor

Before you mount the monitor on a wall, a swing arm, or other mounting fixture, you must remove the monitor base and the pedestal. Note that the mounting fixture is not supplied. You will need a Phillips screwdriver. Read the following warning and caution statements before beginning the procedure.

WARNING: To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the wall-mounting fixture and check that it is capable of supporting the monitor.

Preparation

WARNING: Do not place the double-hinged monitor face down for folding. The base hinge can spring up and cause serious injury or damage.

1.Disconnect the power cable and any other cables from the monitor.

2.Carefully place the monitor face down on a flat, soft surface. This might entail elongating the hinge and tilting the monitor back to ensure the monitor is flat.

3.With your fingertips, snap off the VESA cover from the back of the monitor.

4.Remove all four screws from the VESA plate.

User’s Guide

3–3

Page 14 Page 16
Image 15
Page 14 Page 16
Contents W1858 W2228h W2338h W2348h W2448h/hc W2558hc User’s GuideUSA Notational Conventions User’s Guide Contents Preparing the Monitor for Shipping TroubleshootingTechnical Specifications Operating the MonitorAgency Regulatory Notices Viii User’s Guide Product Features FeaturesHP LCD Monitors Cantilever base Safety and Maintenance Guidelines Important Safety InformationSafety Precautions Cleaning the Monitor Maintenance GuidelinesAssembling the cantilever base Setting Up the MonitorInstalling the Monitor Unpacking the MonitorUnfolding the double-hinged monitor Preparing the cantilever-base monitor for wall-mounting Wall-mounting the double-hinged monitorPreparation Connecting the VGA Analog or DVI-D Digital Cable To connect the DVI-D cable Connecting the VGA / DVI-I Cable Select Models OnlyConnecting the Hdmi Cable Select Models Only To connect the VGA cableCable/Adapter Name Description Audio and Video Cables and AdaptersConnecting the USB Hub Cable Select Models Only Connecting the Audio CableConnecting the Power Cable Connecting USB Devices to the Monitor Select Models OnlyCable Management Adjusting the TiltAdjusting the Swivel Pivoting the Monitor Select Models Only Adjusting the Height Select Models OnlyUser’s Guide Keyboard Parking User’s Guide CD Software and Utilities Installing DriversDownloading updated drivers from the Internet Operating the MonitorSelect Open Auto-Adjustment Software Using the Auto-Adjustment FunctionMy Display Software Select Models Only Front-Panel ControlsIcon Description OSD Menu Selections Using the On-screen Display OSDMaintains proportional image Icon Main Menu Submenu Options DescriptionSets your own red color levels Top Optimizing Analog Video Selecting Video Input ConnectorsAdjusting Screen Quality Identifying Monitor ConditionsAmbient Light Sensor Select Models Power-Saver FeatureWebcam Select Models Task Light Select ModelsHigh-Bandwidth Digital Content Protection Hdcp Capturing Webcam Video and SnapshotsHaving a Video Chat or Making Conference Calls User’s Guide Remote Slot Description Using the Monitor Menu with the Remote Control Viewing Photos Main MenuListening to Music/Audio Viewing a Slide ShowWatching Video Files Changing SettingsChanging the Display Image Size Setting Changing the Language SettingChanging the Slideshow Transition Changing the Slideshow SpeedChanging the Slideshow Shuffle Restoring Factory Default Adjusting the LCD Settings for DPFRemoving the Cantilever Base Preparing the Monitor for ShippingFolding the Double-Hinged Monitor User’s Guide User’s Guide Troubleshooting Solving Common ProblemsProblem Solution Troubleshooting Locating the Rating Label User’s Guide Specifications model w1858 Technical SpecificationsModel w2338, w2348 Specifications model w2228Model w2558 Specifications model w2448Preset Video and High-Definition Modes User’s Guide User’s Guide User’s Guide LCD Monitor Quality and Pixel Policy Power Cord Set RequirementsCables Agency Regulatory NoticesFederal Communications Commission Notice ModificationsEuropean Union Regulatory Notice Materials DisposalChemical Substances Canadian Notice Avis CanadienUser’s Guide HP Recycling Program Korean Notice EPA Energy Star Compliance#$%&*+ Part number
Related manuals
Manual 1 pages 61.45 Kb

w1858 18.5-inch specifications

The HP w1858 is an 18.5-inch LCD monitor that is designed to meet the demands of both home and office environments. This monitor combines an elegant design with practical features, making it a solid choice for users who require both style and functionality in their display solutions.

One of the standout features of the HP w1858 is its high-quality display. The monitor boasts a resolution of 1366 x 768 pixels, ensuring that users can enjoy clear and vibrant visuals. This resolution strikes a balance between image quality and performance, making it suitable for a variety of tasks, from office work to casual multimedia consumption.

The HP w1858 employs a 5 ms response time, which is essential for reducing motion blur during fast-moving scenes. This feature makes it a decent option for light gaming and video playback, contributing to an overall smoother viewing experience. The monitor also supports a brightness level of 250 cd/m², which helps deliver bright and vivid images, even in brightly lit environments.

In terms of connectivity, the HP w1858 offers multiple input options. It features a VGA port, which allows for easy connection to computers and laptops. This flexibility ensures that users can integrate the monitor into their existing setups without hassle.

The design of the HP w1858 is both sleek and functional. It comes with a simple stand that allows for tilt adjustment, enabling users to find the optimal viewing angle. The monitor is also lightweight, making it easy to mount or reposition as needed. Its slender profile and minimalistic bezels help it fit seamlessly into any workspace.

The HP w1858 incorporates energy-efficient technologies, contributing to reduced power consumption without sacrificing performance. This monitor is Energy Star certified, which means it meets stringent efficiency guidelines, leading to lower utility bills over time.

In summary, the HP w1858 18.5-inch monitor offers a blend of visual clarity, responsiveness, and user-friendly design. With its range of features, it is well-suited for basic computing tasks, media consumption, and even light gaming. Its energy-efficient design ensures that users can enjoy its benefits without increasing their environmental footprint. The HP w1858 is a reliable choice for those seeking a practical and stylish display solution.
Top Page Image Contents