HP w1858 18.5-inch manual Selecting Video Input Connectors, Identifying Monitor Conditions

Page 34

Operating the Monitor

Selecting Video Input Connectors

The input connectors are:

■VGA connector (analog)

■DVI-D connector (digital)

■HDMI connector

The monitor automatically determines which inputs have valid video signals, and displays the image.

You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, the default input selection is DVI. The HDMI cable is in place of the DVI-D cable. The source of input can be switched using the Switch Video Input option in the OSD menu. Switching from a VGA to an HDMI input source may take several seconds.

Identifying Monitor Conditions

Special messages appear on the monitor screen for the following monitor conditions:

■Input Signal Out of Range — Indicates the monitor does not support the video card’s input signal because its resolution or refresh rate are set higher than the monitor supports.

Change your video card settings to a lower resolution or refresh rate. Restart your computer for the new settings to take effect.

■Monitor Going to Sleep — Indicates the screen display is entering a sleep mode. The speakers are turned off in sleep mode.

■Check Video Cable — Indicates a video input cable is not properly connected to the computer or monitor.

■OSD Lock-out — The OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock-outappears for 10 seconds.

If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD. If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.

■No Input Signal — Indicates the monitor is not receiving a video signal from the computer on the monitor video input connector(s). Check to see if the computer or input signal source is off or in the power-saver mode.

■Auto Adjustment in Progress — Indicates the auto-adjustment function is active. See “Adjusting Screen Quality” in this chapter.

Adjusting Screen Quality

The auto-adjustment feature automatically fine-tunes the image quality for display size, position, clock, and phase each time a new video mode is displayed. For more precise adjustments of VGA input, run the Auto-Adjustment software on the CD. See “Using the Auto-Adjustment Function” in this chapter.

If you want additional image-quality improvement, use the Clock and Clock Phase controls of the monitor to fine-tune the image. See “Optimizing Analog Video” in this chapter.

Optimizing Analog Video

Some monitors contain advanced circuitry that allow the monitor to function as a standard analog monitor. Two controls in the OSD menu can be adjusted to improve analog image performance:

■Clock — Increase or decrease the value to minimize any vertical bars or stripes visible on the screen background.

■Clock Phase — Increase or decrease the value to minimize video distortion or video jitter.

Use these controls only when the auto-adjustment function does not provide a satisfactory monitor image in analog mode.

4–8

User’s Guide

Page 33 Page 35
Image 34
Page 33 Page 35
Contents User’s Guide W1858 W2228h W2338h W2348h W2448h/hc W2558hcUSA Notational Conventions User’s Guide Contents Operating the Monitor TroubleshootingTechnical Specifications Preparing the Monitor for ShippingAgency Regulatory Notices Viii User’s Guide Features Product FeaturesHP LCD Monitors Cantilever base Important Safety Information Safety and Maintenance GuidelinesSafety Precautions Maintenance Guidelines Cleaning the MonitorUnpacking the Monitor Setting Up the MonitorInstalling the Monitor Assembling the cantilever baseUnfolding the double-hinged monitor Wall-mounting the double-hinged monitor Preparing the cantilever-base monitor for wall-mountingPreparation Connecting the VGA Analog or DVI-D Digital Cable To connect the VGA cable Connecting the VGA / DVI-I Cable Select Models OnlyConnecting the Hdmi Cable Select Models Only To connect the DVI-D cableAudio and Video Cables and Adapters Cable/Adapter Name DescriptionConnecting the Audio Cable Connecting the USB Hub Cable Select Models OnlyConnecting USB Devices to the Monitor Select Models Only Connecting the Power CableAdjusting the Tilt Cable ManagementAdjusting the Swivel Adjusting the Height Select Models Only Pivoting the Monitor Select Models OnlyUser’s Guide Keyboard Parking User’s Guide Operating the Monitor Installing DriversDownloading updated drivers from the Internet CD Software and UtilitiesUsing the Auto-Adjustment Function Select Open Auto-Adjustment SoftwareFront-Panel Controls My Display Software Select Models OnlyIcon Description Using the On-screen Display OSD OSD Menu SelectionsIcon Main Menu Submenu Options Description Maintains proportional imageSets your own red color levels Top Identifying Monitor Conditions Selecting Video Input ConnectorsAdjusting Screen Quality Optimizing Analog VideoPower-Saver Feature Ambient Light Sensor Select ModelsTask Light Select Models Webcam Select ModelsCapturing Webcam Video and Snapshots High-Bandwidth Digital Content Protection HdcpHaving a Video Chat or Making Conference Calls User’s Guide Remote Slot Description Using the Monitor Menu with the Remote Control Main Menu Viewing PhotosViewing a Slide Show Listening to Music/AudioChanging Settings Watching Video FilesChanging the Language Setting Changing the Display Image Size SettingChanging the Slideshow Speed Changing the Slideshow TransitionChanging the Slideshow Shuffle Adjusting the LCD Settings for DPF Restoring Factory DefaultPreparing the Monitor for Shipping Removing the Cantilever BaseFolding the Double-Hinged Monitor User’s Guide User’s Guide Solving Common Problems TroubleshootingProblem Solution Troubleshooting Locating the Rating Label User’s Guide Technical Specifications Specifications model w1858Specifications model w2228 Model w2338, w2348Specifications model w2448 Model w2558Preset Video and High-Definition Modes User’s Guide User’s Guide User’s Guide Power Cord Set Requirements LCD Monitor Quality and Pixel PolicyModifications Agency Regulatory NoticesFederal Communications Commission Notice CablesAvis Canadien Materials DisposalChemical Substances Canadian Notice European Union Regulatory NoticeUser’s Guide Korean Notice EPA Energy Star Compliance HP Recycling Program#$%&*+ Part number
Related manuals
Manual 1 pages 61.45 Kb

w1858 18.5-inch specifications

The HP w1858 is an 18.5-inch LCD monitor that is designed to meet the demands of both home and office environments. This monitor combines an elegant design with practical features, making it a solid choice for users who require both style and functionality in their display solutions.

One of the standout features of the HP w1858 is its high-quality display. The monitor boasts a resolution of 1366 x 768 pixels, ensuring that users can enjoy clear and vibrant visuals. This resolution strikes a balance between image quality and performance, making it suitable for a variety of tasks, from office work to casual multimedia consumption.

The HP w1858 employs a 5 ms response time, which is essential for reducing motion blur during fast-moving scenes. This feature makes it a decent option for light gaming and video playback, contributing to an overall smoother viewing experience. The monitor also supports a brightness level of 250 cd/m², which helps deliver bright and vivid images, even in brightly lit environments.

In terms of connectivity, the HP w1858 offers multiple input options. It features a VGA port, which allows for easy connection to computers and laptops. This flexibility ensures that users can integrate the monitor into their existing setups without hassle.

The design of the HP w1858 is both sleek and functional. It comes with a simple stand that allows for tilt adjustment, enabling users to find the optimal viewing angle. The monitor is also lightweight, making it easy to mount or reposition as needed. Its slender profile and minimalistic bezels help it fit seamlessly into any workspace.

The HP w1858 incorporates energy-efficient technologies, contributing to reduced power consumption without sacrificing performance. This monitor is Energy Star certified, which means it meets stringent efficiency guidelines, leading to lower utility bills over time.

In summary, the HP w1858 18.5-inch monitor offers a blend of visual clarity, responsiveness, and user-friendly design. With its range of features, it is well-suited for basic computing tasks, media consumption, and even light gaming. Its energy-efficient design ensures that users can enjoy its benefits without increasing their environmental footprint. The HP w1858 is a reliable choice for those seeking a practical and stylish display solution.
Top Page Image Contents