HP V241 23.6-inch manual Button. The factory default setting is

		button. The factory default setting is
		“30 seconds”.
		To select the function of power
Management		management for your monitor.
		To enable the energy-saving
		function, Select
	Auto-Sleep Mode	On
		off
		The factory default setting is On.
		The “Power Saver Mode”control
		allow quick user selection of
		reduced power modes while the
		monitor is still in use.Select:
		Off
	Power Saver Mode	10% Savings
		20% Savings
		30% Savings
		40% Savings
		50%Savings
		The factory default setting is On.
		Restores power to the monitor
		following an unexpected removal of
	Power-On Recall	power. Select:
		On
		Off
		The factory default is On.
		The resolution, refresh rate and
		frequency information will be
	Mode Display	displayed when the OSD main
		menu is accessed. Please select
		“On” or “Off” as the factory default
		on-off setting.
		The operational status of your
		monitor will be displayed when you
		power on your monitor. To select
		the positions where the status
	Monitor Status	information is displayed:
		Top
		Middle
		Bottom
		Off
		The factory default setting is “Top”
	DDC/CI support	Controlling some OSD menu
		functions, such as brightness,

10