HP DreamColor LP2480zx Professional manual 2OSD Menu

Table 4-2OSD Menu (continued)

Icon	Main Menu	Submenu	Description
			● Fill to Screen—image fills the entire screen and may look
			distorted or elongated because of non-proportional scaling of
			height and width
			● Fill to Aspect Ratio—image is sized to fit the screen and
			maintains proportional image
			● One-to-one—disables video scaling, displays an image that
			is smaller in size than the monitor’s capability and centers the
			image on the screen in the active viewing area
			● Overscan—enables over-scanning of the image for HDMI,
			Component, S-video, and Composite inputs
			● Crop Right Side—crops the video on the right side of the
			image (enabled for the supported horizontal resolutions over
			1920 pixels)
			● Crop Left Side—crops the video on the left side of the image
			(enabled for the supported horizontal resolutions over 1920
			pixels)
			● Crop Left and Right (Center)—crops the video on the left and
			right sides in equal amounts and centers the image (enabled
			for the supported horizontal resolutions over 1920 pixels)
		Clock	Minimizes any vertical bars or strips visible on the screen
			background. Adjusting the Clock will also change the horizontal
			screen image.
		Clock Phase	Adjusts the focus of the display. This adjustment allows you to
			remove any horizontal noise and clear or sharpen the image of
			characters.
		Black Level	Adjusts the black level or offset of the monitor. The factory default
			value is 128 (no offset) and the range is 0 to 255.
		OverDrive	Disables or enables the overdrive feature. The factory default is
			Enabled.
			NOTE: OverDrive improves the response time of the panel for
			watching motion video.
		Hue	Adjusts the Hue settings for the HDMI, Component, S-Video, and
			Composite inputs.
		Saturation	Adjusts the Saturation settings for the HDMI, Component, S-
			Video, and Composite inputs.
	PIP Control		Sets up PIP functionality.
			NOTE: DVI-I, HDMI, and DisplayPort are supported for the main
			window. Component, S-Video, and Composite are supported for
			the secondary window.
		PIP Mode	Enables PIP mode (PIP or Side-by-Side).
		PIP Position	Sets the position of the PIP window on the screen. The choices
			are top right, top left, bottom right, or bottom left.
		Sub Picture Select	Selects the input source for the PIP window. The choices are
			Component, S-Video, or Composite video signal inputs.

Adjusting the Monitor Settings 25