HP DreamColor LP2480zx Professional manual Horizontal OSD Position

Table 4-2OSD Menu (continued)

Icon	Main Menu	Submenu	Description
		Horizontal OSD Position	Changes the viewing position of the OSD menu to the left or right
			area of the screen. The factory default range is 50.
		Vertical OSD Position	Changes the viewing position of the OSD menu to the top or
			bottom area of the screen. The factory default range is 50.
		Function Control	Selects the operation of the front panel Function button. The
			options are Color Space, Brightness, Color Temp, Reset to Last,
			Black Level, OverDrive, Custom Scale, Crop (L-C-R), and PIP
			Control.
		Monitor Status Message	Disables or enables the Power-On Status Display and selects the
			position the OSD message is displayed on the screen.
		Warning Messages	Enables or Disables OSD recommendation messages.
		Calibration Limit	Sets the limit (in backlight hours) for the calibration message. The
			range is 0 to 5,000 hours. The factory default is 1000 hours. A
			value of 0 disables the timer. The number of backlight hours since
			the last calibration is also displayed.
		OSD Button Labels	Disables or enables the front panel button label display on the
			screen.
		Mode Display	Disables or enables the mode display information that is displayed
			on the bottom of the main menu.
		OSD Transparency	Adjust to view the background information through the OSD.
		OSD Timeout	Sets the time duration in seconds that the OSD is visible after the
			last button is pressed. The range is 10 – 60 seconds. The factory
			default is 40 seconds.
		OSD Rotation	Rotates the OSD menus and messages to support the monitor's
			Pivot feature. The choices are 0 and 90 degrees.
	Video Input		Provides a menu of the input options. The default input selection
	Control		is DVI-I 1.
		DVI-1 Analog/Digital	Selects DVI-I 1 as the primary video input. This input accepts
			either analog or digital signals.
		DVI-2 Analog/Digital	Selects DVI-I 2 as the primary video input. This input accepts
			either analog or digital signals.
		HDMI	Selects HDMI as the primary video input.
		DisplayPort	Selects DisplayPort as the primary video input.
		Component	Selects Component as the primary video input.
		S-Video	Selects S-Video as the primary video input.
		Composite	Selects Composite as the primary video input.
		Input Auto-Switching	Enables or disables the monitor automatically switching to an
			active input if the current signal is inactive. The factory default is
			Enabled.
	Information		Selects and displays important information about the monitor.
		Current Settings	Provides the current input video mode.

Adjusting the Monitor Settings 27