HP S2021 20-inch manual Preparing the monitor for wall-mounting

Page 13

2.Align the column with the monitor support column and push forward until the column locks in place. Then align the stand with the column and push the stand towards the bottom of the monitor.

Figure 3-1Installing the monitor column and stand

3.Lift the monitor to an upright position and place on a flat, stable surface. Figure 3-2Monitor in upright position

Preparing the monitor for wall-mounting

1.Check the stability of the wall-mounting fixture.

WARNING! To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the wall-mounting fixture and check that it is capable of supporting the monitor.

2.Disconnect the power cable and any other cables from the monitor.

3.Place the monitor face down on a flat, protected surface.

ENWW	Installing The Monitor 7

Image 13

Contents S1921/S1921d, S2021/S2021a LCD Monitors Page About This Guide Iv About This Guide Table of contents Appendix C Agency Regulatory Notices Appendix B Technical SpecificationsCompaq LCD Monitors Product FeaturesEnww Important Safety Information Safety and Maintenance GuidelinesSafety Precautions Cleaning the Monitor Maintenance GuidelinesShipping the Monitor Installing the Monitor Setting Up the MonitorUnpacking the Monitor Preparing the monitor for desktop usePreparing the monitor for wall-mounting 3Bottom view of monitor stand showing release button circled Enww Connecting the VGA Analog Cable or DVI-D Digital Cable Connecting CablesTo connect the VGA cable provided with select models To connect the DVI-D cable provided with select models7Connecting the audio cables select models Connecting the Audio Cable select modelsConnecting the Power Cable 9Tilt adjustment Adjusting the TiltInstalling the monitor driver software from the CD Installing DriversDownloading updated drivers from the Internet Operating the MonitorSelect Open Auto Adjustment Software Using the Auto Adjustment FunctionFront-Bezel Controls Power LEDIcon Description Open, or select the OSD menuMinus and Plus +OSD button function OK/Auto button functionMenu button function OK/Auto , + and Power button function Using the On-Screen Display OSDOSD Icon Main Menu Options Sub-menu Options DescriptionIdentifying Monitor Conditions Language Miscellaneous Input Select ResetPower-Saver Feature Adjusting Screen QualityOptimizing Analog Video Solving Common Problems TroubleshootingProblem Solution Do the following Getting Support from hp.comStart button , Control Panel, and Hardware and Sound. Under Preparing to Call Technical Support Have the following information available when you callLocating the Rating Label Specifications Technical SpecificationsEnvironmental Requirements Table B-2Models S2021\S2021a Preset Video Modes LCD Monitor Quality and Pixel Policy Power Cord Set RequirementsFederal Communications Commission Notice Agency Regulatory NoticesModifications CablesAvis Canadien Canadian NoticeEuropean Union Regulatory Notice German Ergonomics Notice Japanese Notice Korean Notice Power Cord Set RequirementsProduct Environmental Notices Japanese Power Cord RequirementsMaterials Disposal Chemical Substances11363-2006 Turkey EEE Regulation