HP LE1711 17-inch manual Installing the HP Display LiteSaver Software

Page 29
HP Display LiteSaver

3.Press the Menu button to select Management.

4.Scroll down and highlight and select Sleep Timer > Set Current Time.

Installing the HP Display LiteSaver Software NOTE: You must set the current local time before you reset the time for Sleep Time or On Time. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is displayed as 13 hours 15 minutes.

A power failure or loss of power to the monitor will cause the timer to reset to 00:00. If this occurs, you will need to reset the sleep timer mode.

5.Press the Menu button once to enter the adjustment mode for hours.

6.Press the - (Minus) or + (Plus) button to adjust the hour.

7.Press the Menu button again to enter the time for minutes.

8.Press the - (Minus) or + (Plus) button to adjust the minutes.

9.Press the Menu button to lock in the time chosen.

10.After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat steps 6 through 9 to set Sleep Time.

11.If you do not want to set Sleep Time, press the Menu button twice, then select Save and Return to exit the menu.

12.After setting Sleep Time, the highlight automatically skips to Set On Time hours. Repeat steps 6 through 9 to set On Time.

13.Set the Timer mode to On to activate the Sleep Timer settings.

14.When you are finished, select Save and Return to exit the menu.

The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode until the next On Time activates or a monitor button is pressed.

HP Display LiteSaver

HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place the monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD panel against image retention. Image retention can occur when the monitor is left on while displaying the same image for an extended period of time, leaving a shadow of the image on the screen.

Installing the HP Display LiteSaver Software

1.Insert the CD in the computer CD-ROM Drive. The CD menu is displayed.

2.Select Install HP Display LiteSaver Software.

3.After installing the software, click the HP Display LiteSaver icon in the Windows system tray or right-click the icon and select Configure from the pop-up menu.

4.Select the following options to configure the HP Display LiteSaver features:

HP Display LiteSaver 21

Page 28 Page 30
Image 29
Page 28 Page 30
Contents User Guide HP LE1711 and LE1911 LCD MonitorsFirst Edition September Document Part Number 2009 Hewlett-Packard Development Company, L.PAbout This Guide iv About This Guide 1 Product Features Table of contents2 Safety and Maintenance Guidelines 3 Setting Up the MonitorAppendix C Agency Regulatory Notices Appendix A TroubleshootingAppendix B Technical Specifications Turkey EEE Regulation Appendix D LCD Monitor Quality and Pixel PolicyPage HP LCD Monitors 1 Product Features2 Chapter 1 Product Features Compliant with the following regulated specificationsIntelligent Management AssetControl European Union CE Directives Swedish TCO RequirementsImportant Safety Information 2 Safety and Maintenance GuidelinesShipping the Monitor Maintenance GuidelinesCleaning the Monitor Attaching the Monitor Base 3 Setting Up the MonitorRear Components Connecting the CablesTurning on the Monitor Adjusting the MonitorMounting the Monitor Panel Using the Accessory RailsFigure 3-6 Removing the Pedestal Base Figure 3-7 Installing the Monitor on a Swing Arm5. Reconnect the cables to the monitor panel Mounting the Monitor PanelLocating the Rating Labels Installing a Cable LockSoftware and Utilities 4 Operating the MonitorThe Information File The Image Color Matching FileUsing the Auto-Adjustment Function Installing the .INF and .ICM FilesInstalling from the CD 3. Select Install Monitor Driver Software1. Allow the monitor to warm up for 20 minutes before adjusting To use the auto-adjustment featureIf the result is not satisfactory, continue with the procedure Using the Auto-Adjustment Function14 Chapter 4 Operating the Monitor Front Panel ControlsTable 4-1 Monitor Front Panel Controls ControlUsing the On-Screen Display Menu Adjusting the Monitor SettingsTable 4-2 OSD Menu OSD Menu SelectionsIcon Main MenuTable 4-2 OSD Menu continued Optimizing Digital Conversion Identifying Monitor Conditions Using the HP Display Assistant UtilitySleep Timer Mode HP Display LiteSaver Installing the HP Display LiteSaver Software2. Select Install HP Display LiteSaver Software Changing the Color Temperature sRGB Support4. Click the Advanced Settings button Installing the sRGB ICM File for Microsoft Windows Vista2. Click Personalization 3. Click Display Settings Solving Common Problems A TroubleshootingProblem SolutionPower Button Lockout is displayed Preparing to Call Technical Support Online Technical SupportTable B-1 LE1711 Specifications B Technical SpecificationsLE1711 Model 28 Appendix B Technical Specifications LE1911 ModelTable B-1 LE1711 Specifications continued Table B-2 LE1911 SpecificationsEnergy Saver Feature Recognizing Preset Display ResolutionsEntering User Modes LE1711 and LE1911 ModelsFederal Communications Commission Notice C Agency Regulatory NoticesModifications CablesEuropean Union Regulatory Notice Canadian NoticeAvis Canadien German Ergonomics Notice Japanese Notice Korean Notice Power Cord Set RequirementsJapanese Power Cord Requirements Materials Disposal Product Environmental NoticesENERGY STAR Qualification Restriction of Hazardous Substances RoHS HP Recycling ProgramChemical Substances 11363-2006 11363-2006 Turkey EEE RegulationIn Conformity with the EEE Regulation EEE Yönetmeliğine Uygundur D LCD Monitor Quality and Pixel Policy
Top Page Image Contents