IMPORTANT: It is only necessary to do this when you fill the container with salt for the first time.
o Pour salt into the water softener, using the funnel that is supplied with the appliance. You should add approximately 1.5 kg of salt into the water softener.
oIt is perfectly normal for a small amount of water to come out of the water softener, whilst you are filling it with salt. This does not mean that the water softener is filled with the correct amount of salt.
oRefit and fully tighten the water softener cap.
oThe salt required warning light will go out shortly after you have filled the water softener
with salt. When the salt indicator (5) lights on the control panel, then you should follow the filling with dishwasher salt procedure again.
oIt is recommended that you run a RAPID program, without any dishes loaded into the dishwasher, after filling with salt to remove any spilt or excess salt.
oIMPORTANT: You do not need to pour 1 litre of water into the container when you subsequently fill the water softener with salt.
12