o IMPORTANT: Wait for 5 seconds before pressing the program selection button, otherwise the appliance may not function correctly.
o Press the program button (7) to choose an appropriate wash program for the load that you are washing. The relevant program indicator (6) will light to show which program you have
selected.
oClose the door firmly, so that you hear the door lock click shut.
oAfter a few seconds, you will hear the appliance begin to fill with water and the wash program will have started.
Changing the wash program
IMPORTANT: This should only be attempted when the cycle has only just started, otherwise the detergent may have already been released or you could have hot water escaping.
oSlightly open the door of the appliance and press the program button for about 3 seconds.
oThe machine will cancel the program in progress and you can then select the required program as usual.
Adding more dishes
IMPORTANT: This should only be attempted when the cycle has only just started, otherwise the detergent may have already been released or you could have hot water escaping.
oOpen the door a little way to pause the current program. Wait until the spray arms have stopped rotating before opening the door fully.
oThe program light will stop blinking and a buzzer will sound every minute until the door is closed again.
oAdd the forgotten dishes to the upper or lower basket.
24