IMPORTANT: Your appliance has an unbalance control system. If this system detects that the washload is unevenly distributed inside the drum. Your washing machine will try to redistribute the load before spinning. If after several attempts it is unable to redistribute the washload, then the appliance will either spin at a slower speed or skip the spin cycle and drain.
Uneven load distribution can be caused by too large a wash load or too small a wash load. It can also occur if a single item if washed inside the appliance.
Poor wash results
My garments are looking grey and there are limescale deposits present in the drum of my washing machine.
oThere is not enough detergent being added. o The incorrect detergent is being used.
o Stains are not being
o The correct wash program or wash temperature was not selected.
I have followed the advice given above, but my garments are still coming out with grey stains on them.
oThe garments are soiled with oils, ointments or grease and were washed without enough detergent.
oThe wash temperature selected was too low.
oFabric conditioner has come into contact with the garments. If this happens try to wash out these stains as quickly as you can and try to avoid getting conditioner on the garments in future.
After the final rinse, I can still see foam.
oModern detergents can result in there still being foam in the final rinse, this does not mean that the washing is not being rinsed properly.
28