9Once levelled correctly, you should tighten the lock nut back up on each of the washing machine feet using a spanner.
IMPORTANT: When the washing machine is positioned in the location where it will be used. Make sure that all four feet are resting firmly on the floor, by pressing down on each corner and checking that the appliance stands still.
Connecting to the mains water supply
9The water inlet hose will be inside the drum of your washing machine, when you receive the appliance.
9Connect and fully tighten the inlet hose to the threaded inlet valve that is located at the rear of the washing machine. You should connect the end with the right angle connector on it to the back of your appliance.
9Connect the other end of the inlet hose to your mains water supply
33