Selecting a wash program
9Load your laundry and put detergent in the relevant compartment of the soap drawer.
9Close the porthole door firmly.
9Activate the pop out program selector knob by depressing it.
9Select the most appropriate wash program for the garments that you are washing, by turning the program selector knob.
oThe LCD display will briefly flash the wash program number that you have selected and then show the approximate time that it will take the chosen wash cycle to complete.
9Select any program options by using the program option button underneath the LCD display (for more information, please refer to the “setting a program option” section).
oAny program option that you select, will affect the length of time that the wash cycle will take to complete. The LCD display will update to reflect this change.
9Press the Start/Stop button.
oAfter approximately 5 seconds, you will hear your washing machine start the wash cycle.
oIf there is a power failure or the plug is pulled out of the socket when a wash cycle is in progress., The wash program will continue, once power has been restored.
o Whilst the wash program is in progress, the program phase and time remaining to the end of the wash cycle will appear on the display.
17