ASRock 960GM-VGS3 FX Super IO Configuration, Serial Port Address, Infrared Port, EPP Version

3.4.6 Super IO Configuration

BIOS SETUP UTILITY
Advanced
Configure Super IO Chipset		Allow BIOS to Enable
		or Disable Floppy
Serial Port Address	[3F8 / IRQ4]	Controller.
Infrared Port Address	[Disabled]
Parallel Port Address	[378]
Parallel Port Mode	[ECP+EPP]
EPP Version	[1.9]
ECP Mode UMA Channel	[DMA3]
Parallel Port IRQ	[IRQ7]
			Select Screen
			Select Item
		+-	Change Option
		F1	General Help
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

Serial Port Address

Use this item to set the address for the onboard serial port. Configuration options: [3F8 / IRQ4] and [3E8 / IRQ4].

Infrared Port

Use this item to enable or disable the onboard infrared port.

Infrared Port Address

Use this item to set the address for the onboard infrared port.Configuration options: [2F8 / IRQ3] and [2E8 / IRQ3].

Parallel Port Address

Use this item to set the address for the onboard parallel port. Configuration options: [378] and [278].

Parallel Port Mode

Use this item to set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in the following item, “EPP Version”. Configuration op- tions: [Normal], [Bi-Directional] and [ECP+EPP].

EPP Version

Use this item to set the EPP version. Configuration options: [1.9] and [1.7].

ECP Mode DMA Channel

Use this item to set the ECP mode DMA channel. Configuration options: [DMA0], [DMA1] and [DMA3].

Parallel Port IRQ

Use this item to set the IRQ for the parallel port. Configuration options: [IRQ5] and [IRQ7].

47