ASRock AD2550B-ITX manual I/O Panel, LAN Port LED Indications

Page 11

1.4 I/O Panel

1

PS/2 Mouse Port (Green)

7

USB 2.0

Ports (USB01)

2

Parallel Port

8

USB 2.0

Ports (USB23)

* 3

LAN RJ-45 Port

9

VGA Port

4

Line In (Light Blue)

10

COM Port

5

Front Speaker (Lime)

11

PS/2 Keyboard Port (Purple)

6Microphone (Pink)

*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.

LAN Port LED Indications

Activity/Link LED

Status

Description

Off

No Link

Blinking

Data Activity

On

Link

 

SPEED LED

 

 

 

 

Status

 

Description

Off

 

10Mbps connection

 

Orange

 

100Mbps connection

 

 

 

 

 

ACT/LINK SPEED

LED LED

LAN Port

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on your system. Please follow below instructions according to the OS you install.

Please click “VIA HD Audio Deck” icon , and click “Advanced Options” on the left side

on the bottom. In “Advanced Options” screen, select “Independent Headphone”, and click “OK” to save your change.

11

Image 11 Contents
AD2550B-ITX Disclaimer Copyright NoticeContents Software Support Introduction Package ContentsSpecifications Hardware Bios Feature Unique Feature Support CDPage Page 17.0cm 6.7 Motherboard LayoutLAN Port LED Indications I/O PanelScrew Holes Pre-installation PrecautionsInstalling a SO-DIMM Installation of Memory Modules SO-DIMMExpansion Slot PCI Slot Installing an expansion cardAdvanced Super IO Configuration CIR Controller Enabled ASRock Smart Remote Installation GuideCIR sensors in different angles Jumper Setting Jumpers SetupOnboard Headers and Connectors Front Panel Audio Header Chassis Speaker Header Please connect the chassis Hot Plug Function for Sata / Sataii HDDs What is Hot Plug Function?Sata power cable Sata / Sataii HDD Hot Plug Feature and Operation GuideHow to Hot Plug a Sata / Sataii HDD Install Windows 7 OS on your system Driver Installation GuideInstalling Windows 7 on Sata / Sataii HDDs Using Sata / Sataii HDDs with NCQ function Set up UefiUefi Menu Bar IntroductionF10 Navigation KeysMain Screen Navigation KeysInstant Flash Advanced ScreenNo-Excute Memory Protection CPU ConfigurationIntel Hyper Threading Technology Chipset Configuration SATA2 Mode Storage ConfigurationSuper IO Configuration Acpi Configuration Legacy USB Support USB ConfigurationUSB 2.0 Controller +1.5V Voltage Voltage ConfigurationDram Voltage +1.05V VoltageHardware Health Event Monitoring Screen CPU Fan SettingChassis Fan 1 Setting Boot Screen Security Screen Exit Screen Software Support
Related manuals
Manual 140 pages 30.98 Kb