Chapter 3: UEFI SETUP UTILITY
3.1Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY when you start up the computer. Please press <F2> or <Del> during the
If you wish to enter the UEFI SETUP UTILITY after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. You may also restart by turning the system off and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
3.1.1 UEFI Menu Bar
The top of the screen has a menu bar with the following selections:
Main | To set up the system time/date information |
OC Tweaker | To set up overclocking features |
Advanced | To set up the advanced UEFI features |
H/W Monitor | To display current hardware status |
Boot | To set up the default system device to locate and load the |
| Operating System |
Security | To set up the security features |
Exit | To exit the current screen or the UEFI SETUP UTILITY |
Use <
> key or < 
> key to choose among the selections on the menu bar, and then press <Enter> to get into the sub screen. You can also use the mouse to click your required item.
25