Baumatic B620MC manual Initial set-up of your oven, Setting the time of day, Before first use

Page 11

Initial set-up of your oven

Setting the time of day

oWhen the oven is connected to your mains supply for the first time (or after a power cut), the digits on the LED display (7) will show “0:00” and there will be an audible signal.

oPress the clock button (3) and the hour digits will flash on the LED display.

oTurn the adjustment knob (6) to adjust the hour time. Your oven has a 24 hour clock, so it is possible to adjust the hour digit between 0 and 23.

oWhen the correct hour time appears on the LED display, press the clock button again. The minute digits will flash on the LED display.

oTurn the adjustment knob to adjust the minute time; it is possible to adjust the minute digit between 0 and 59.

oWhen the correct minute time appears on the LED display, press the clock button for a third time to confirm the time of day.

oThe “:” symbol between the digits will flash and the time of day will light on the LED display.

IMPORTANT: You can adjust the time of day at any time by following the instructions above, as long as the oven is not currently in use.

Before first use

oTo remove any residue from the oven that may have been left from the manufacturing process, you should select the convection & fan oven function and set the thermostat to its maximum temperature setting.

oIt is perfectly normal for a smell to be produced during this process.

oYou should make sure that any windows in the room are left open during this process.

oIt is advisable for you not to remain in the room whilst the burning off process is taking place.

o You should leave the oven on maximum setting for 30 – 40 minutes.

oAfter the oven cavity has cooled, it should then be cleaned with warm soapy water, using either a sponge or soft cloth. No abrasive cleaners should be used.

11

Image 11
Contents Megachef B620MC Megachef B620MC Contents Environmental note General Information Important Safety InformationCleaning Child SafetyGeneral Safety Declaration of conformity Standard accessories SpecificationsProduct Dimensions Aperture Dimensions Product specificationsCooling fan Optional extrasElectrical details LED display Before first use Setting the time of dayInitial set-up of your oven Minute minder Timer functionsSelecting an oven function, temperature and duration Using your ovenDuration timer Oven functions Checking the time function Pausing a cooking functionCancelling a cooking function Internal light function Safety lockEnergy saving function Cooking guidelines Shelf positions Food probe settings Pork Never clean the oven surfaces by steam cleaning Cleaning and maintenanceReplacing the oven bulb Removing the oven door for cleaningRemoving the side racks Installation Positioning the appliance Ventilation requirements My appliance isn’t working correctly There appears to be no power to the oven and grillDo not Attempt to Repair the Appliance Yourself Baumatic Consumables Page United Kingdom