oIf you are placing another cooling appliance next door to this product, then there must be a gap of at least 2 cm between the appliances. This will help to prevent condensation from forming.
oBe sure to leave enough space for the opening of the door, to avoid damage to the appliance or personal injury.
Troubleshooting
IMPORTANT: If your fridge freezer appears not to be operating properly, before contacting the Baumatic Customer Care Department, please refer to the checklist below.
My fridge freezer does not appear to be working/there is no power to my appliance.
oCheck that the plug is fully inserted into the power socket.
oCheck that there is power to your mains supply (e.g. that there hasn’t been a power cut or that the fuse hasn’t blown).
oCheck that the control panel has not been turned to the off setting.
o Check that your mains supply voltage, corresponds to the voltage stated on the rating plate of your appliance.
My fridge freezer appears to be performing poorly.
oCheck that the appliance isn’t overloaded and that food hasn’t been packed too tightly into it.
o The thermostat setting is too low; you should turn the thermostat dial to a higher number.
oEnsure that the doors are closing properly and that the doors have not been opened for a prolonged period in error.
oEnsure that there is adequate ventilation for your appliance.
My fridge freezer is noisy.
oThe refrigerant gas that circulates the pipework of the appliance may make a slight noise, even if the compressor is not running.
27