Carvin EQ430 manual System Menu, System Data Reset

Page 5

4. Front Panel:

FREQUENCY BAND SELECTORS (numbered 25 through 20K)

Selects which frequency band to be adjusted in Hertz (Hz). Adjust with UP/DOWN.

4.A. SYSTEM MENU:

Press the SYSTEM button to open the SYSTEM menu and to select parameter. Use UP/DOWN buttons to move through the menu pages or adjust parameters. Press EXIT to return to the Channel screens.

Page 1 - > COPY CHANNEL: (Press SYSTEM) ~

To quickly copy the settings to another Channel, use COPY CHANNEL.

~Press SYSTEM for COPY CHANNEL mode (-or UP for pg.2, or EXIT). Select the channel to copy from with UP/DOWN, then press SYSTEM. Select a channel location (Paste into: #) with UP/DOWN.

Press SYSTEM again to paste, or EXIT to end.

< - Page 2 - > SAVE SYSTEM: (Press SYSTEM then UP) ~

SAVE SYSTEM will save a complete setup into a memory location, including all Input/Output settings. You can save multiple systems and recall (load) them later.

~Press SYSTEM to SAVE SYSTEM (-or UP for pg.3, DOWN for pg.1, or EXIT). Select a memory location Save at slot: “#” with UP/DOWN, then press SYSTEM to save.

< - Page 3 - > LOAD SYSTEM: (Press SYSTEM then UP [2 times]) ~

LOAD SYSTEM will recall a complete setup from a memory location, including all Input and Output settings.

~Press SYSTEM to load a system (-or UP for pg.4, DOWN for pg.2, or EXIT). Select the Sys. to load: “#” with UP/DOWN, then press SYSTEM.

<- Page 4 RESET CHANNELS TO FLAT: (Press SYSTEM then UP [3 times]) ~ This will set the parameters for ALL Channels to the “0” or Flat setting, all HPF/LPF’s will be set wide open at 20Hz to 20kHz, and all Limiters to +20dB(off).

~ Press SYSTEM to begin (-or UP for pg.4, DOWN for pg.2, or EXIT).

“Are you sure?” Press UP to continue and reset to flat, or press EXIT to cancel.

SYSTEM DATA RESET:

If corrupt data is loaded into the system, reset the system to clear the corrupt data. Channel values will be reset to “0”.

Channels and Systems saved in memory will not be affected.

~First, turn the unit OFF.

Hold down the SYSTEM and EXIT buttons and then turn the unit back ON. Hold the buttons in until the channel screen is displayed.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Table of Contents Serial No Invoice No Invoice Date IMPORTANT! for Your PROTECTION, Please Read the FollowingBypass buttons 1-4 and LEDs SYSTEM, UTILITY, and ExitSelect buttons System Menu System Data ResetUtility Menu 1 Delay Units Press Utility ~3 Security Lockout Press Utility then UP 2 times ~ 5 Unit ID USB Press Utility then UP 4 times ~Delay Channel SettingsGain Channel Screen page 1 Graphic EQHigh Pass HPF and LOW Pass LPF Filters Channel Screen page 3 press Select to access parametersLimiter Serial Connection Software InstallationConnecting the EQ230 or EQ430 hardware Connect to Device USB connection procedure Load and Save Control from the Graphic InterfaceMenu Quick Reference Chart Specifications Carvin X-Drive EQ430/EQ230

EQ430 specifications

The Carvin EQ430 is a versatile and powerful equalizer that caters to audio professionals, musicians, and sound engineers seeking high-quality performance and flexibility. Known for its robust build and user-friendly interface, the EQ430 stands out as a reliable tool for enhancing audio clarity and tonal balance.

One of the primary features of the Carvin EQ430 is its 30-band graphic equalizer, offering precise control over frequency ranges. The equalizer is capable of handling a range of 20Hz to 20kHz, allowing users to tailor their sound with acute accuracy. Each frequency band is adjustable in 1/3-octave increments, providing extensive options for fine-tuning audio to meet specific requirements in various environments, be it live performances, studio work, or installations.

The EQ430 utilizes low-noise op-amps and high-grade capacitors, ensuring optimal audio fidelity and performance. The design incorporates a high-quality signal path that minimizes distortion and maximizes dynamic range, making the device suitable even for high-level sound applications.

In addition to the extensive equalization capabilities, the EQ430 features LED level indicators that allow for real-time monitoring of signal levels. This visual feedback is crucial for sound engineers when making adjustments during a performance, ensuring that the audio output remains in the optimal range without risk of clipping.

The inclusion of an internal limiter is another advantage of the Carvin EQ430. This feature automatically controls the output level, preventing potential distortion from overly aggressive settings. Such protective measures can be invaluable in live situations where varying sound levels are common.

Another notable characteristic of the EQ430 is its rugged construction, designed to withstand the rigors of touring and travel. With a compact 19-inch rack-mountable format, it easily integrates into any sound system setup without taking up excessive space.

Overall, the Carvin EQ430 combines sophisticated equalization features with robust technology and reliable performance, making it an excellent choice for anyone looking to enhance their audio systems. Whether you are refining a live sound mix or perfecting a studio track, the EQ430 delivers the precision and versatility needed to achieve professional-quality results in any audio environment.
Top Page Image Contents