Carvin EQ430 manual Utility Menu, Delay Units Press Utility ~

Page 6

4.B. UTILITY MENU:

Press the UTILITY button to open the UTILITY menu and to select function. Use UP/DOWN buttons to move through the menu pages or adjust parameters. Press EXIT to return to the Channel screens.

Page 1 - > DELAY UNITS (Press UTILITY) ~

~Press UTILITY again to change the setting.

Use Up/Down to display delay times in Seconds, Feet, or Meters. Press UTILITY again to save changes.

Press UP for Page 2 or EXIT to return to the Channel screens.

<- Page 2 - > DELAY MEMORY (Press UTILITY then UP) ~ This screen displays how much memory is remaining for use.

The EQ230/EQ430 starts with a total of 120mS of delay memory. As you assign more delay to channels, the remaining available memory time decreases.

~ Press UP for Page 3, DOWN for Page 1, or EXIT to return to the Channel screens.

<- Page 3 - > SECURITY LOCKOUT (Press UTILITY then UP [2 times]) ~

~Press UTILITY to change the setting.

Select ON to prevent any changes to the EQ230/EQ430 settings. Select OFF to allow changes to the EQ230/EQ430 settings. Press UTILITY to enter the password.

Input the 4-digit password using the SELECT (1-4)buttons. *Note: The factory set default password is 1122.

Press UP for Page 4, DOWN for Page 3, or EXIT to return to the Channel screens.

<- Page 4 - > CHANGE PASSWORD (Press UTILITY then UP [3 times]) ~ To change the 4-DIGIT PASSWORD, you must first enter the old password. ~ Press UTILITY to change the setting.

Press SELECT (1-4)buttons to first enter the old password. *Note: The factory set default password is 1122.

Then enter the new password using SELECT (1-4)buttons.

Press UP for Page 5, DOWN for Page 3, or EXIT to return to the Channel screens.

<- Page 5 - > Unit ID – USB (Press UTILITY then UP [4 times]) ~

More than one EQ230/EQ430 can be controlled through USB ports from a single computer. When doing this, set the UNIT ID for each EQ230/EQ430 to a different number. The limit is 16 units.

~Press UTILITY to change the setting.

Press UP/DOWN to set the UNIT ID from 1-16. The maximum cable length for a USB connection (without an active extension) is 16.4ft (5M).

Press UTILITY again to save changes.

Press UP for Page 6, DOWN for Page 4, or EXIT to return to the Channel screens.

< - Page 6: Firmware Version (Press UTILITY then UP [5 times])

Displays firmware version. If desired, download updates from a computer through the USB port using the Carvin XD™ EQ software. (DOWN for Page 5 or EXIT)

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Table of Contents IMPORTANT! for Your PROTECTION, Please Read the Following Serial No Invoice No Invoice DateSYSTEM, UTILITY, and Exit Select buttonsBypass buttons 1-4 and LEDs System Data Reset System Menu3 Security Lockout Press Utility then UP 2 times ~ 1 Delay Units Press Utility ~Utility Menu 5 Unit ID USB Press Utility then UP 4 times ~Gain Channel SettingsDelay Channel Screen page 1 Graphic EQChannel Screen page 3 press Select to access parameters LimiterHigh Pass HPF and LOW Pass LPF Filters Software Installation Connecting the EQ230 or EQ430 hardware Connect to DeviceSerial Connection USB connection procedure Control from the Graphic Interface Load and SaveSpecifications Carvin X-Drive EQ430/EQ230 Menu Quick Reference Chart

EQ430 specifications

The Carvin EQ430 is a versatile and powerful equalizer that caters to audio professionals, musicians, and sound engineers seeking high-quality performance and flexibility. Known for its robust build and user-friendly interface, the EQ430 stands out as a reliable tool for enhancing audio clarity and tonal balance.

One of the primary features of the Carvin EQ430 is its 30-band graphic equalizer, offering precise control over frequency ranges. The equalizer is capable of handling a range of 20Hz to 20kHz, allowing users to tailor their sound with acute accuracy. Each frequency band is adjustable in 1/3-octave increments, providing extensive options for fine-tuning audio to meet specific requirements in various environments, be it live performances, studio work, or installations.

The EQ430 utilizes low-noise op-amps and high-grade capacitors, ensuring optimal audio fidelity and performance. The design incorporates a high-quality signal path that minimizes distortion and maximizes dynamic range, making the device suitable even for high-level sound applications.

In addition to the extensive equalization capabilities, the EQ430 features LED level indicators that allow for real-time monitoring of signal levels. This visual feedback is crucial for sound engineers when making adjustments during a performance, ensuring that the audio output remains in the optimal range without risk of clipping.

The inclusion of an internal limiter is another advantage of the Carvin EQ430. This feature automatically controls the output level, preventing potential distortion from overly aggressive settings. Such protective measures can be invaluable in live situations where varying sound levels are common.

Another notable characteristic of the EQ430 is its rugged construction, designed to withstand the rigors of touring and travel. With a compact 19-inch rack-mountable format, it easily integrates into any sound system setup without taking up excessive space.

Overall, the Carvin EQ430 combines sophisticated equalization features with robust technology and reliable performance, making it an excellent choice for anyone looking to enhance their audio systems. Whether you are refining a live sound mix or perfecting a studio track, the EQ430 delivers the precision and versatility needed to achieve professional-quality results in any audio environment.
Top Page Image Contents