Panasonic SC-BTT583 Remote control doesn’t work properly, Unit switches to standby mode

This unit is turned off when the input for the TV is switched.

¾This is a normal phenomenon when using VIERA Link (HDAVI Control 4 or later). For details please read the operating instructions for the TV.

The remote control doesn’t work properly.

¾Change the batteries in the remote control. (> 8)

¾The remote control and main unit are using different codes. If “SET ” is displayed on the unit’s display when a button is pressed on the remote control, change the code on the remote control. (> 40, 49)

The TV tuner mode is not displayed when the TV is switched on.

¾This phenomenon may occur, depending on the TV setting, when “Quick Start” is set to “On”.

¾Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting.

You have forgotten your ratings password. You want to cancel the ratings level.

¾The ratings level returns to the factory preset.

1 While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds. j“00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “03 VL” is displayed on the unit’s display.

3 Press [OK] on the remote control or [< OPEN/CLOSE] on the unit.

This unit does not recognize the USB connection correctly.

¾Disconnect and reconnect the USB cable. If it still does not recognize the connection, turn this unit off and on again.

¾USB devices may not be recognized by this unit when connected using the following : ja USB hub

ja USB extension cable other than the supplied with the Wireless LAN Adaptor DY-WL5 (optional)

¾If you connect USB HDD to this unit, use the USB cable that is supplied with the HDD.

The unit switches to standby mode.

¾This unit will automatically turn to standby mode after 30 minutes if it is inactive. (> 21)

¾When the time set for the sleep timer has passed, the main unit will be turned off. (> 8)

¾One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on.

The unit does not turn off.

1Press and hold [Í/I] on the main unit for 5 seconds. (If still unable to turn the unit off, disconnect the AC mains lead, wait 1 minute,

then reconnect the AC mains lead.)

2Reset the unit as follows:

While the unit is off, press and hold

[+ VOLUME], [< OPEN/CLOSE] and [Í/I] on the main unit at the same time for more than 5 seconds.

Picture

The images from this unit do not appear on the TV.

Picture is distorted. Jittering occurs.

¾An incorrect resolution is selected in “HDMI Video Format”. Reset the setting as follows:

1While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

j“00 RET” is displayed on the unit’s display.

2Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “04 PRG” is

displayed on the unit’s display.

3Press and hold [OK] on the remote control or [< OPEN/CLOSE] on the unit for at least

3 seconds.

Set the item again. (> 36)

jWhen Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select “Yes” in “Default Settings” and make proper settings. (> 40)

¾The unit and television are using different video systems.

1While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

–“00 RET” is displayed on the unit’s display.

2Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “05 P/N” is displayed on the unit’s display.

(Continued on the next page)

Advanced	operations
	Reference

VQT3Z79 45