Panasonic SC-BTT583, SC-BTT490, SC-BTT790 operating instructions Messages, On the television

Page 48

[BTT790] Wireless system (SH-FX71)

The wireless link indicator is flashing.

¾There is no link between the main unit and the wireless system. Turn the wireless system off and then back on. Alternatively, turn the wireless system off, disconnect the AC mains lead and then reconnect it.

The wireless link indicator does not light.

¾Check that the main unit is turned on, and the wireless system is turned on.

¾Ensure that the digital transmitter is fully inserted into the slot of the main unit. (> 15)

The wireless link indicator keeps flashing between red and green.

¾There is a power supply problem. Consult the dealer.

Network

I can’t connect to the network.

¾Confirm the network connection and settings. (> 16, 18, 38)

¾Check the operating instructions for each device and connect accordingly.

When using wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback.

¾Higher transfer rate router such as 802.11n (2.4 GHz) wireless router may solve the problem. If you use 802.11n (2.4 GHz) wireless router, it is necessary to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.

¾On the “Wireless Settings” screen (> 38), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Easy Network Setting” (> 18) again.

Messages

The following messages or service numbers may appear on the TV or unit’s display.

On the television

Cannot play.

¾You inserted an incompatible disc.

Cannot play on this unit.

¾You tried to play a non-compatible image.

¾Confirm “SD” on the unit’s display is not displayed and re-insert the card.

No disc inserted.

¾The disc may be upside down.

$This operation is not available.

¾Some operations are unsupported by the unit. For example;

jBD-Video: During playback, reverse slow-motion or reverse frame-by-frame is not possible.

IP address is not set.

¾The “IP Address” in “IP Address / DNS Settings” is “---. ---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and “Gateway Address”. (Select the automatic address acquisition if necessary.)

The wireless access point currently has a low network security setting. It is recommended to change to a higher setting.

¾Authentication type for the wireless LAN is set to “Open system”, or the encryption type is set to “No encryption”. It is recommended to encrypt for safety reasons. For details, refer to the instructions of the wireless router being used. Encryption is required when playing back video, etc., from DLNA compatible devices.

No Video

¾Depending on the connected iPod/iPhone, video menu may not be available on the TV. Select “ALL” on the unit’s display and operate video playback from your iPod/iPhone menu. (> 26)

48 VQT3Z79

Page 47 Page 49
Image 48
Page 47 Page 49
Contents SC-BTT583 SC-BTT490 Safety precautions Table of contents Package contents and accessories Accessories Unit and media careDevice types Contents format Playable mediaDiscs that cannot be played by this unit Region management informationFinalize BD-VideoRemote control Using the remote controlControl reference guide TV operation buttonsStandby/on switch Í/I Main unit FrontMain unit Rear Enjoy surround speaker sound wirelessly Upgrade to 7.1-channel systemPositioning Preparing the speakers Assembling the front and surround speakersAttach the stand to the base Attach the speakerConnecting the speaker cables Speaker cable sticker ConnectorConnections Speaker connectionWhat is ARC? Connection to a TVTV Audio Best qualityFM antenna connection Standard picture and better audioStandard picture and audio When the connecting devices have an Hdmi terminal When the connecting devices do not have an Hdmi terminalOther device connection BTT790 Digital transmitter connectionConnecting to the network Wireless LAN connection≥ ForAustraliaandNewZealand ExceptAustraliaandNewZealandConnecting the AC mains lead Preparing the wireless systemSet the voltage at the bottom of the main unit Settings Easy SettingEasy Network Setting Wired connectionReprogramming the remote control Firmware updatesTo update the firmware Inserting or removing Media SpeakersSelecting the type of audio Connect the TV and the main unit s14Home menu Multi User Mode Switching the userUsing coloured buttons Using facial recognitionPlayback Operations during playbackDisplaying menus and playback information Enjoying 3D video and photosEnjoying BD-Live Using the iPod/iPhone SlideshowIPod/iPhone Connection IPod/iPhone PlaybackAutomatic input switching Power on link Power Off LinkEasy control only with Viera remote control Viera Link Hdavi ControlConnecting the Hdmi cable Connecting the optical digital audio cableEnjoying TV and STB with unit’s speakers Select the TV audioManual tuning and presetting ≥ Network connection ≥ Network setting To enjoy video communication ex. SkypeTMSelect the item and press OK Press EXIT, Home or POP-UP MENU/TOP MenuHome Network feature Playing back contents on the Dlna serverUsing the Digital Media Controller Option menu Operation MenuPicture Settings Personal TasteSound Settings Setup menu 3D SettingsPicture Sound Audio Delay Manual Settings Graphic Display Level¾ BD-Video Secondary Audio ¾ Hdmi Audio OutputLanguage NetworkRatings System¾ Power Off Link Unit SettingsRemote Control Firmware UpdateSpeaker settings Adjusting speaker levelDelay time Delay time for the Surround and Surround back speakersSpeaker installation option Adjusting speaker level during playSurround Effects Attaching to a wallPreventing the speakers from falling or dropping   Troubleshooting guide Speaker assembly optionGeneral operation Reattaching the speaker cable to the standRemote control doesn’t work properly TV tuner mode is not displayed when the TV is switched onUnit switches to standby mode This unit does not recognize the USB connection correctlyVideo is not output Video is not output in high-definition3D video is not output 3D video is not output correctly as 2DIPod/iPhone operation RadioMessages On the televisionOn the unit’s display Specifications BTT583 BTT490 Approx .7 kgBTT583 BTT490Restriction on use of unauthorized copied content File formatLanguage code list Supplemental informationDisplay languages list Inside of productAbout Divx Video About Divx VIDEO-ON-DEMAND This product incorporates the following software Reference Panasonic Corporation
Related manuals
Manual 56 pages 47.56 Kb

SC-BTT790, SC-BTT583, SC-BTT490 specifications

The Panasonic SC-BTT490 is a sophisticated home theater system that brings the cinematic experience right into your living room. This versatile system is designed to deliver premium audio and visual performance, making it an ideal choice for movie nights, gaming, and music streaming.

One of the standout features of the SC-BTT490 is its powerful 5.1-channel surround sound system. With a total output of 1000 watts, this setup provides an immersive audio experience that enhances every detail of your favorite movies and music. The system includes a subwoofer, which adds depth and richness to the sound, ensuring that you feel every beat and rumble.

The SC-BTT490 is equipped with Bluetooth technology, allowing for seamless wireless streaming from various devices such as smartphones, tablets, and laptops. This feature makes it easy to play music from your personal library or popular streaming services without the hassle of wires. In addition, the system supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that high-definition sound quality is maintained.

Panasonic has integrated various connectivity options into the SC-BTT490, including HDMI ports for easy connection to your television or other devices. The HDMI ARC (Audio Return Channel) feature simplifies the connection, allowing users to control both the TV and audio system with a single remote. This functionality enhances convenience and improves the overall user experience.

Another notable aspect of the SC-BTT490 is its built-in DVD player, which can play a variety of disc formats, including CDs and DVDs. The system includes an upscaling feature, enhancing the resolution of standard DVDs to near high definition for a better viewing experience.

Furthermore, the SC-BTT490 offers multiple sound modes, allowing users to customize the audio output to suit different types of content, from action-packed films to soft classical music. The dedicated audio settings help to optimize sound quality for an even more personalized experience.

Overall, the Panasonic SC-BTT490 is an all-in-one home theater solution that combines advanced audio technologies, user-friendly connectivity options, and versatile playback capabilities. Its impressive performance makes it a worthy addition to any entertainment setup, promising to elevate your viewing and listening experiences to new heights.
Top Page Image Contents