Installation Guide

Installation procedures may vary based on the operating system installed on your PC. The following instructions are based on the Windows XP OS:

Turn on your PC and plug the modem into the USB interface slot to begin software installation. Windows should automatically detect the new device and will prompt you to begin installation.

After following the prompts of installation setup, upon completion, a shortcut will be placed on your desktop for quick future access.

Note:

1.If installation “auto-run” does not begin, you will need to locate the “autoRun.exe)” file in the driver path, and Double-Click on AutoRun.exe to run the installation manually.

2.A Micro-SD card is an optional accessory.

3.Please do not remove the USIM/SIM card and or the Micro-SD card when the modem is in use.

Upon successful installation of the HSPA management program, the program will launch automatically. You may also double-click the short cut icon on the desktop to launch the program.

Main Interface Overview

Following table are listed Short Cut Icons in PC Suite Interface.

Interface Icons	Provided Services
Home	Home Page (Click on <Connect> icon from the
	main window to connect/disconnect from the
	Internet)
Contacts	Display The Phones Book Interface

SMS	Display The Text Message Interface
Browser	Open the Browser

Settings	Display the Settings manual

Following table are listed the Icons of status bar information

Installation Guide

Main Interface Overview

Interface Icons

Provided Services

SMS