Connection Statistics Icon Description
Network Signal
Network Status
Network Type
Roaming
New Message
Network Connecting
Indicates the signal strength of the network
Indicates the network status. This will display the operator name which the modem can find the network. Or show the modem haven’t ready.< No (U)SIM> or <NO Device>
Display in the status bar, to show you which network you are using (GPRS / EDGE/ UMTS or HSPA)
Roaming Icon “ 
”, when the network is under roaming
Display the SMS status including new SMS/SIM card memory is full/Data Card memory is full
Connecting Icon “
“display in the status bar, when the network is connected into internet network
Following table are listed the LED Indicates for each status.
LED Indicator | Desctiption |
Flashing Green & Red multicolour circularly
Quickly Flashing Green & Red multicolour circularly
Green Light Slow Flashing
Constant Green Light
Red Light Slow Flashing
Constant Red Light
Network Searching
Out of order
Registering into HSPA or UMTS network Registered to HSPA or UMTS network Registering into GPRS or EDGE network Registered to GPRS or EDGE network
Entrance to Main Interface
The application runs automatically and the main window will pop up when the modem will be connected. You can also access and run the application from the <Start> menu.
If the PIN code is enabled, please enter the correct PIN code in the entry field, and click on <OK>. You may try only 3 times to enter the correct PIN code; after three incorrect attempts, the USIM or SIM card will be blocked.
5