3.2Receiving a call
When you receive an incoming call, press the 
key to talk and then
hang up using the 
key.
If the 
icon is displayed, the vibrator is activated and there is no
ringtone. If the 
icon is displayed, the cellphone neither rings nor vibrates.
The caller’s number is displayed if it is transmitted by the network (contact your network operator to check service availability).
Muting the ringtone
To mute ringtone of current incoming call, press 
key. Answer the call
by pressing the 
key.
Rejecting a call
Press the 
key once, or reject it by SMS (Options\Reject call with
SMS).
3.3During a call (1)
During a call, following options are available:
-New call (Hold the current call and dial another number)
-Hold (Hold the current call)
-Mute (Mute the current call)
-DTMF (Enable/Disable sending DTMF during the call)
-Volume (Adjust the vloume level)
PROMPT: You may also adjust sound level by using | key directly |
during a call. |
|
(1)Contact your network operator to check service availability.
-Switch audio patch (Switch the audio path between the Bluetooth headset and cellphone)
-Directory (Enter the directory)
-Messages (Enter Message Center)
-Calendar (Enter Calendar)
-Services (Enter the Service menu)
-Sound recorder (record your current call).
You can switch the audio speech from handset to Bluetooth device when connected.
You may also use Handsfree function with 
during a call. WARNING: move the handset away from your ear while using the “handsfree” option because the amplified volume might cause hearing damage.
Handling two calls
•Answering a second call (ensure that “Call waiting” is activated, see page 40).
•To call a second party during a call, dial the number directly.
3.4Conference calls (1)
Your cellphone allows you to talk to several people at the same time (up to five). If you are on a double call, press “Options” and select
“Conference”. If a third call comes in, answer it by pressing the 
key and speak with your new caller.
This caller becomes a member of the conference if you press “Options”
and select “Add to conference”. Pressing 
disconnects the current call.
To end the conference call, press “Options” and select “End conf.”.
(1)Contact your network operator to check service availability.
23 | 24 |