1 Getting started .....................
1.1Set-up
Removing or installing the back cover
Inserting or removing the SIM card (1)
You must insert your SIM card to make phone calls. Please power off your phone and remove battery before inserting or removing the SIM card.
Single SIM (one touch 803/one touch 813)
Dual SIM (one touch 813D)
Installing or removing the battery
Single SIM (one touch 803/one touch 813)
Dual SIM (one touch 813D)
•Insert and click the battery into place, then close the telephone cover.
•Unclip the cover, then remove the battery.
Charging the battery
Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out.
(1)Check with your network operator to make sure that your SIM card is 3V or 1.8V compatible. The old 5 Volt cards can no longer be used. Please contact your operator.
Connect the battery charger to your phone and mains socket respectively.
•Charging may take about 20 minutes to start if the battery is flat.
•Be careful not to force the plug into the socket.
•Make sure the battery is correctly inserted before connecting the charger.
13 | 14 |