Enjoying TV and STB with unit’s speakers
You can select whether audio is output from the unit’s speakers or the TV speakers by using the TV menu settings. Switch the audio output setting of the TV to this unit’s speakers.
Select the TV audio
When the TV is turned on, this unit will also automatically turn on.
e.g., | OUT |
| OPTICAL |
Optical digital audio cable (not supplied)
1Press [HOME].
2Press [3, 4, 2, 1] to select “Others” and
press [OK].
3Press [2, 1] to select “Setup” and press [OK].
4Press [3, 4] to select “Sound” and press [OK].
5Press [3, 4] to select “TV Audio Input”. and
press [OK].
6Press [3, 4] to switch “AUX”, “ARC” or “DIGITAL IN” and press [OK].
≥Select an audio input terminal connected to the unit.
≥For details, refer to the operating instructions of the TV.
Select the STB audio
When the STB power is turned on, this unit and the TV will automatically turn on. The video is output from the TV, and the audio is output from the speakers of this unit.
Connecting the optical digital audio cable
≥When this unit and the STB are connected by an optical digital audio cable, the settings below are required to enable output of audio from the speakers of this unit.
e.g.,
HDMI cable (not supplied)
Optical digital audio cable (not supplied)
Set Top Box, etc.
1Press
2 Press [STATUS] to select “CABLE/
SATELLITE AUDIO ON”.
Set to “CABLE/SATELLITE AUDIO OFF” when this unit and the STB are not connected by an optical digital audio cable.
24 VQT4D57