Panasonic SC-BTT190 manual Manual tuning and presetting

3

to select the

Press [RADIO] to select “FM”.

1

2 Press the number buttons channel.

Press and hold [OK].

Release the button when “AUTO” is displayed.

The tuner starts to preset all the stations it can receive into the channels in ascending order.

Listening to a preset channel

Listening to the Radio

You can preset up to 30 channels.

Preparation

Make sure that the FM antenna is connected. (> 12)

Presetting stations automatically

1 Press [RADIO] to select “FM”.

2 Press and hold [STATUS] to select “LOWEST” or “CURRENT”.

LOWEST

To begin auto preset with the lowest frequency (FM87.50).

CURRENT

To begin auto preset with the current frequency.*

* To change the frequency, refer to “Manual tuning and presetting”.

To select a 1-digit number e.g., 1: [1] B [OK].

To select a 2-digit number e.g., 12: [1] B [2].

Alternatively, press [W, X] or [3, 4].

∫Manual tuning and presetting

Select a radio broadcast.

1 Press [RADIO] to select “FM”.

2 Press [SEARCH6] or [SEARCH5] to

select the frequency.

≥To start automatic tuning, press and hold [SEARCH6], [SEARCH5] until the frequency starts scrolling. Tuning stops when a station is found.

To preset the channel

3While listening to the radio broadcast

Press [OK].

4While “P” is flashing on the display Press the number buttons to select the channel.

≥ A station previously stored is overwritten when another station is stored in the same channel preset.

≥ The radio settings will be shown on the unit's display. (Some settings are also indicated on the TV screen.) Radio&

TV

Advancedoperations

Reference

VQT4D57 25