ASRock N68C-GS FX manual Trcd, Trp, Tras

Memory Timing

		BIOS SETUP UTILITY
OC Tweaker
Memory Timing
Memory Controller Mode		[Unganged]
Power Down Enable		[Disabled]
Bank Interleaving		[Auto]
Channel Interleaving		[Auto]
CAS Latency (CL)	7	[Auto]
TRCD	7	[Auto]
TRP	7	[Auto]
TRAS	20	[Auto]
Command Rate	2	[Auto]		Select Screen
TRC	27	[Auto]		Select Item
TWR	8	[Auto]	+-	Change Option
TRFC	110	[Auto]	F1	General Help
TRRD	4	[Auto]	F9	Load Defaults
TWTR	4	[Auto]	F10	Save and Exit
TRTP	4	[Auto]	ESC	Exit
TFAW	16	[Auto]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

Memory Controller Mode

It allows you to adjust the memory controller mode. Configuration options: [Unganged] and [Ganged]. The default value is [Unganged].

Power Down Enable

Use this item to enable or disable DDR power down mode.

Bank Interleaving

Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention.

Channel Interleaving

It allows you to enable Channel Memory Interleaving. The default value for DDR2 is [Hash 1]. The default value for DDR3 is [Hash 2].

CAS Latency (CL)

Use this item to adjust the means of memory accessing. The default value is [Auto].

TRCD

Use this to adjust TRCD values. The default value is [Auto].

TRP

Use this to adjust TRP values. The default value is [Auto].

TRAS

Use this to adjust TRAS values. The default value is [Auto].

Command Rate

Use this item to change Command Rate Auto/Manual setting. Min: 1N.

Max: 2N. The default is [Auto].

TRC

Use this to adjust TRC values. The default value is [Auto].

38