ASRock N68C-GS FX Hardware Health Event Monitoring Screen, CPU Quiet Fan, Target CPU Temperature

3 . 5 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.

		BIOS SETUP UTILITY
Main	OC Tweaker	Advanced	H/W Monitor	Boot	Security	Exit
Hardware Health Event Monitoring				Enable/Disable
				CPU Quiet Fan
				Function.
CPU Temperature			: 37 C / 98 F
M / B Temperature			: 27 C / 80 F
CPU Fan Speed			: 4722 RPM
Chassis Fan Speed			: N / A
Power Fan Speed			: N / A
Vcore			: 1.216V
+ 3.30V			: 3.248V		Select Screen
+ 5.00V			: 5.136V
					Select Item
+ 12.00V			: 12.091V
				F1	General Help
CPU Quiet Fan			[Disabled]	F9	Load Defaults
				F10	Save and Exit
				ESC	Exit
	v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

CPU Quiet Fan

This item allows you to control the CPU fan speed and fan noise. If you set this option as [Disabled], the CPU fan will operate in full speed. If you set this option as [Enabled], you will find the items “Target CPU Temperature” and “Target Fan Speed” appear to allow you adjusting them. The default value is [Disabled]. You are allowed to enable this function only when you install 4-pin CPU fan.

Target CPU Temperature

The target temperature will be between 45C/113F and 65C/149F. The default value is [50 C/122F].

Target Fan Speed

Use this option to set the target fan speed. You can freely adjust the target fan speed according to the target CPU temperature that you choose. Configuration options: [Level 1] to [Level 9]. The default value is [Level 9].

50