ASRock N68-VS3 FX manual Trcd, Trp, Tras, Trtp, Twr, Trfc

Memory Timing

	BIOS SETUP UTILITY
OC Tweaker
Memory Timing
Power Down Enable	[Disabled]
Bank Interleaving	[Auto]
Channel Interleaving	[Hash 2]
CAS Latency (CL)	[Auto]
TRCD	[Auto]
TRP	[Auto]
TRAS	[Auto]
Command Rate	[Auto]
TRC	[Auto]		Select Screen
TRTP	[Auto]
			Select Item
TWR	[Auto]
		+-	Change Option
TRFC	[Auto]
		F1	General Help
TRRD	[Auto]
		F9	Load Defaults
TWTR	[Auto]
		F10	Save and Exit
TRTP	[Auto]
		ESC	Exit
TFAW	[Auto]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

Power Down Enable

Use this item to enable or disable DDR power down mode.

Bank Interleaving

Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention.

Channel Interleaving

This allows you to enable Channel Memory Interleaving. The default value is [Hash 2].

CAS Latency (CL)

Use this item to adjust the means of memory accessing. The default value is [Auto].

TRCD

Use this to adjust TRCD values. The default value is [Auto].

TRP

Use this to adjust TRP values. The default value is [Auto].

TRAS

Use this to adjust TRAS values. The default value is [Auto].

Command Rate

Use this item to change Command Rate Auto/Manual setting. Min: 1N.

Max: 2N. The default is [Auto].

TRC

Use this to adjust TRC values. The default value is [Auto].

TRTP

Use this to adjust TRTP values. The default value is [Auto].

TWR

Use this to adjust TWR values. The default value is [Auto].

TRFC

Use this to adjust TRFC values. The default value is [Auto].

35