3.4.4 Storage Configuration
| BIOS SETUP UTILITY |
|
| |
Advanced |
|
|
| |
Storage Configuration |
| DISABLED: disables the | ||
| integrated IDE | |||
|
| |||
|
| Controller. | ||
OnBoard IDE Controller | [Both] | PRIMARY: enables only | ||
|
| the Primary IDE | ||
Primary IDE Master | [Hard Disk] | Controller. | ||
SECONDARY: enables only | ||||
Primary IDE Slave | [Not Detected] | |||
the Secondary IDE | ||||
Secondary IDE Master | [Not Detected] | |||
Controller. | ||||
Secondary IDE Slave | [Not Detected] | |||
BOTH: enables both IDE | ||||
|
| |||
|
| Controllers. | ||
|
|
| Select Screen | |
|
|
| Select Item | |
|
| +- | Change Option | |
|
| F1 | General Help | |
|
| F9 | Load Defaults | |
|
| F10 | Save and Exit | |
|
| ESC | Exit | |
v02.54 (C) Copyright |
Onboard IDE Controller
Use this item to enable or disable the “Onboard IDE Controller” feature. The default value is [Both].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will use the “Primary IDE Master” as the example in the following instruction, which can be applied to the configurations of “Secondary IDE Master”, “Primary IDE Slave” and “Secondary IDE Slave” as well.
BIOS SETUP UTILITY
Advanced
Primary IDE Master
Device | :Hard Disk |
Vendor | :MAXTOR 6L080J4 |
Size | :80.0 GB |
LBA Mode | :Supported |
Block Mode | :16Sectors |
PIO Mode | :4 |
Async DMA | :MultiWord |
Ultra DMA | :Ultra |
S.M.A.R.T. | :Supported |
|
|
Type | [Auto] |
LBA/Large Mode | [Auto] |
Block | [Auto] |
PIO Mode | [Auto] |
DMA Mode | [Auto] |
S . M . A . R . T . | [Disabled] |
32Bit Data Transfer | [Disabled] |
Select the type
of device connected to the system.
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
3 0