ASRock K7S41GX2 manual Expansion Slots PCI, AMR, and AGP Slots, Installing an expansion card

Page 15

2.4Expansion Slots (PCI, AMR, and AGP Slots)

There are 2 PCI slots, 1 AMR slot, and 1 AGP slot on K7S41GX2 motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

AMR slot: The AMR slot is used to insert an ASRock MR card (optional) with v.92 Modem functionality.

AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.

Please do NOT use a 3.3V AGP card on the AGP slot of this motherboard! It may cause permanent damage! For the voltage information of your graphics card, please check with the graphics card vendors.

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover.

1 5

Image 15
Contents K7S41GX2 Disclaimer Copyright NoticeContents Software Support Introduction Package ContentsSpecifications Support CD Bios FeatureUnique Feature See CautionPage Page 19.8cm 7.8-in Motherboard LayoutLAN Port LED Indications I/O PanelPre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationNotch break Installation of Memory Modules DimmExpansion Slots PCI, AMR, and AGP Slots Installing an expansion cardPS2USBPWR1 Jumpers SetupClear Cmos J1 Jumpers Connector Description ConnectorsFront Panel Audio Connector Driver Installation Guide Bios Menu Bar System Time HourMinuteSecond Navigation KeysMain Screen To jump to the Exit Screen or exit the current screenOC Tweaker Screen Vccm Voltage Intelligent Energy SaverDram Frequency Dram CAS LatencyCPU Configuration Advanced ScreenASRock Instant Flash V02.54 C Copyright 1985-2003, American Megatrends, Inc CPU ConfigurationChipset Configuration Acpi Configuration OnBoard IDE Controller Both Storage ConfigurationIDE Device Configuration Onboard IDE ControllerBlock Multi-Sector Transfer LBA/Large ModePIO Mode DMA ModePCI IDE BusMaster PCIPnP ConfigurationPCI Latency Timer Latency TimerSuper IO Configuration Floppy ConfigurationParallel Port IRQ Parallel Port ModeECP Mode DMA Channel EPP VersionUSB 2.0 Support USB ConfigurationUSB Controller Enabled USB ControllerBoot Security Exit Hardware Health Event Monitoring ScreenMain OC Tweaker Advanced Full Screen Logo Boot ScreenBoot Settings Configuration Boot LogoSecurity Screen Boot From Onboard LANBoot Up Num-Lock Change Supervisor PasswordExit Screen Drivers Menu Install Operating SystemSupport CD Information Running The Support CD

K7S41GX2 specifications

The ASRock K7S41GX2 is a motherboards that embodies an efficient balance of performance, compatibility, and value. It is designed to cater to the needs of budget-conscious users who seek robust capabilities without compromising on essential features. Built around the SiS 741GX chipset, this motherboard specifically targets the AMD socket A processors, supporting the AMD Athlon, Athlon XP, and Duron CPUs. This compatibility makes it an excellent choice for users looking to build or upgrade older systems.

One of the standout features of the ASRock K7S41GX2 is its affordability, making it a perfect entry-level solution for gamers and general users alike. The motherboard supports up to 2GB of DDR400 memory, providing ample capacity and speed for multitasking and running demanding applications. Additionally, the board boasts integrated graphics capabilities courtesy of the SiS Mirage 2 graphics engine, which offers sufficient graphical power for general computing and light gaming.

Another noteworthy attribute is the excellent expandability options. The K7S41GX2 comes equipped with multiple expansion slots, including one PCI Express x16 slot and three PCI slots, allowing users to add various cards such as dedicated graphics cards, sound cards, or network adapters to enhance their system's functionality. It also offers four SATA ports, which enable users to connect multiple modern storage devices, enhancing data transfer speeds and overall system performance.

Connectivity is further optimized with integrated Ethernet capabilities through a Realtek RTL8100C network controller, ensuring reliable network performance and internet access. Additionally, the board features several USB 2.0 ports, enabling users to connect a plethora of peripherals without hassle.

In terms of build quality, ASRock is known for its solid construction, ensuring longevity and reliability. The K7S41GX2 incorporates various safety features such as over-voltage protection and an anti-thunder design, which further enhances its durability in various environmental conditions.

Overall, the ASRock K7S41GX2 stands out as a versatile motherboard suitable for a range of users, from budget builders to those needing a solid foundation for basic computing tasks. Its combination of performance, expandability, and inherent technologies makes it an excellent choice for anyone looking to assemble or upgrade an affordable yet effective desktop system.