Lochinvar RPV-I&S service manual

Page 14

RPV-I&S

THE FOLLOWING INSTRUCTIONS ARE FOR INSTALLATION OF:

GAS WATER HEATERS SUITABLE FOR WATER (POTABLE) HEATING AND SPACE HEATING

1.All piping components connected to this water heater for space heating applications must be suitable for use with potable water.

2.Toxic chemicals, such as those used for boiler treatment, must not be introduced into potable water used for space heating.

3.This water heater must not be connected to an existing heating system or component(s) previously used with a non-potable water heating appliance.

4.When the system requires water for space heating at temperatures higher than required for other means, a tempering valve must be installed to temper the water for those uses in order to reduce the scald hazard potential.

Image 14

Contents Powered Vent GAS Water Heater General InformationVenting InstallationMinimum Clearances What to do if YOU Smell GASVenting System Condensation Exceptions For Installations in CanadaModel Service Part DRV1200Terminating Through the Wall VentingThrough the Roof Venting Vertical Venting MaximumHigh Altitude Lengths For LOW Ground Clearance InstallationsVent Connector Lengths for 2 5.1cm Diameter PVC MinimumThrough the Roof Venting Vertical Venting Through the Wall VentingUnconfined Spaces High Altitude Vent Connector ModificationsCombustion AIR Suppl Y Confined SpacesFirst Being Certain IT is Filled with Water Specially Engineered InstallationsWater Connections Faucet at the time it is openGeneral Operation GAS ConnectionsElectrical Connections To Fill the Water HeaterRPV-I&S RPV-I&S Burner Flame Check Thermostat AdjustmentRPV-I&S For Your Safety Read Before Lighting Operating InstructionsMaintenance Annually check the operation of the thermostatPage Cutting Tools Inspection, Cleaning, Priming and CementingVent Pipe Preparation and Joining Deburring ToolsRPV-I&S

RPV-I&S specifications

Lochinvar RPV-I&S (Remote Pressure Vessel – Inspection & Safety) is a remarkable innovation in the realm of heating technology, designed to enhance performance, safety, and efficiency in residential and commercial applications. This cutting-edge system integrates advanced features and technologies that cater to the demands of modern energy requirements.

A standout feature of the Lochinvar RPV-I&S is its robust construction, ensuring durability and longevity. The unit is built with high-quality materials that can withstand significant pressure and temperature variations. This durability not only guarantees long-term performance but also minimizes maintenance, making it a cost-effective solution for users.

One of the key characteristics of the RPV-I&S is its remote monitoring capability. This technology allows users to oversee the system's performance from anywhere, providing real-time data on pressure levels, temperature, and overall efficiency. This feature not only enhances user convenience but also enables proactive maintenance, reducing the likelihood of unexpected failures.

The RPV-I&S employs state-of-the-art safety mechanisms. It is equipped with multiple fail-safes and alarm systems designed to detect anomalies in the system's operation. If unsafe conditions arise, the system can automatically shut down, preventing potential hazards. This focus on safety ensures peace of mind for both operators and end-users.

Efficiency is another hallmark of the Lochinvar RPV-I&S. The unit utilizes advanced burner technologies to maximize energy output while minimizing waste. This efficient operation aids in reducing energy bills and contributes to environmental sustainability by lowering carbon emissions. Users can expect substantial energy savings over the unit's lifespan.

Furthermore, the RPV-I&S accommodates a variety of fuel types, including natural gas, propane, and electric options, providing flexibility to users based on their specific needs and energy source availability.

With a user-friendly interface, the Lochinvar RPV-I&S ensures easy operation and adjustment of settings. Its intuitive controls facilitate quick temperature adjustments and system programming, making it accessible for users of all technical backgrounds.

In summary, the Lochinvar RPV-I&S stands out as a technologically advanced, efficient, and safe solution for heating applications. Its combination of robust construction, remote monitoring capabilities, enhanced safety features, and flexible fuel options positions it as a leader in the industry, catering to the evolving demands of today’s energy landscape.