1.4 I/O Panel
1 | 2 | 3 | 4 | 5 |
6
7
| 13 | 12 | 11* | 10 | 9 | 8 | |
1 | USB 2.0 Ports (USB01) |
| 8 | USB 2.0 Ports (USB4_5) |
| ||
2 | Serial Port (COM1) |
| 9 | USB 3.0 Ports (USB2_3) |
| ||
3 | Serial Port (COM2) |
| 10 | HDMI Port (HDMI2) |
| ||
4 | LAN | 11 | HDMI Port (HDMI1)* |
| |||
5 | LAN |
| 12 |
| |||
6 | Front Speaker (Lime) |
| 13 | PS/2 Keyboard/Mouse Port | |||
7 | Microphone (Pink) |
|
|
|
|
| |
There are two LEDs on each LAN port. Please refer to the table below for the LAN
port LED indications.
LAN Port LED Indications
| Activity/Link LED |
| SPEED LED | |
Status |
| Description | Status | Description |
Off |
| No Link | Off | 10Mbps connection |
Blinking | Data Activity | Orange | 100Mbps connection | |
On |
| 100Mbps connection | Green | 1Gbps connection |
ACT/LINK SPEED
LED LED
LAN Port
COM1/COM2 RS232/422/485 Pin Mapping
PIN | RS232 | RS422 | RS485 | |
1 | DCD, Data | TX- | RTX- | |
carrier detect | ||||
|
|
| ||
2 | RXD, Receive | RX+ | N/A | |
data | ||||
|
|
| ||
3 | TXD, Transmit | TX+ | RTX+ | |
data | ||||
|
|
| ||
4 | DTR, Data | RX- | N/A | |
terminal ready | ||||
|
|
| ||
5 | GND | GND | GND |
* HDMI1 port on the I/O panel is for
10