ASRock IMB-A180 manual Acpi Configuration

Page 31

3.3.5 ACPI Configuration

Suspend to RAM

Use this to select whether to auto-detect or disable Suspend-to- RAM. Select [Auto] to enable if the OS supports it.

HPET Timer

Use this to enable or disable HPET Timer.

PS/2 Keyboard Power On

Use this to enable or disable the PS/2 keyboard to turn on the sys- tem from power-soft-off mode.

PCI Devices Power On

Use this to enable or disable the PCI devices to turn on the system from power-soft-off mode.

RTC Alarm Power On

Use this to enable or disable the RTC (Real Time Clock) to power on the system.

CSM

Please disable CSM when you enable Fast Boot option. The default value is [Enabled].

31

Image 31
Contents IMB-A180-H Disclaimer Copyright NoticeContents Introduction Package ContentsCPU SpecificationsRTC Environment IMB-A180 Motherboard LayoutPage LAN Port LED Indications I/O PanelCOM1/COM2 RS232/422/485 Pin Mapping Pre-installation Precautions InstallationInstalling Memory Modules Dimm Expansion Slots PCI Express Slots Installing an Expansion CardJumpers Setup ATX/AT Mode Jumper Lvds Panel Connector Onboard Headers and ConnectorsPanel Backlight & Audio For Windows XP / XP 64-bit OS Pwrbtn Power Switch PIN Digital Input / Output Uefi Menu Bar IntroductionNavigation Keys Main Screen Advanced Screen CPU Configuration Chipset Configuration Good Night LED Restore on AC/Power LossDram Voltage Hard Disk S.M.A.R.T Storage ConfigurationOnChip Sata Channel OnChip Sata TypeSuper IO Configuration Acpi Configuration Legacy USB Support USB ConfigurationUSB 2.0 Controller USB 3.0 ControllerSecurity Device Support Trusted ComputingTool Uefi Update Utility Instant FlashCHAFAN1 Setting CPUFAN1 SettingHardware Health Event Monitoring Screen Bootup Num-Lock Boot ScreenBoot From Onboard LAN Setup Prompt TimeoutSecurity Screen Secure Boot menuDiscard Changes and Exit Load Uefi DefaultsExit Screen Save Changes and ExitSoftware Support
Related manuals
Manual 2 pages 54.13 Kb