3.3.4 Super IO Configuration
COM1 Configuration
Use this to set the parameters of COM1.
COM2 Configuration
Use this to set the parameters of COM2.
COM3 Configuration
Use this to set the parameters of COM3.
COM4 Configuration
Use this to set the parameters of COM4.
COM5 Configuration
Use this to set the parameters of COM5.
COM6 Configuration
Use this to set the parameters of COM6.
LPT1 Port Configuration
Use this to set the parameters of the onboard parallel port.
WDT Timeout Reset
This allows users to enable/disable the Watch Dog Timer timeout to reset the system. The default value is [Disabled].
30