ASRock FM2A75M-DGS R2.0 manual Onboard Headers and Connectors, Serial ATA3 Connectors

1.5 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATA3 Connectors

(SATA_1: see p. 2, No. 11)

(SATA_2: see p. 2, No. 12)

(SATA_3: see p. 2, No. 14)

(SATA_4: see p. 2, No. 13)

(SATA_5: see p. 2, No. 16)

(SATA_6: see p. 2, No. 15)

SATA 1	SATA 2	SATA 3	SATA 4
	SATA_5		SATA_6

These six Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.

Serial ATA (SATA)	Either end of the SATA data
Data Cable	cable can be connected to the
(Optional)	SATA3 hard disk or the SATA3
	connector on this motherboard.
USB 2.0 Headers	Besides four default USB 2.0
(9-pin USB4_5)	ports on the I/O panel, there
(see p. 2, No. 18)	are two USB 2.0 headers on
	this motherboard. Each USB 2.0
	header can support two USB
	2.0 ports.
(9-pin USB8_9)
(see p. 2, No. 19)

English

10

ASRock FM2A75M-DGS R2.0 Motherboard