USB 3.0 Header | Besides two default USB 3.0 |
ports on the I/O panel, there is | |
(see p. 2, No. 21) | one USB 3.0 header on this |
| motherboard. This USB 3.0 |
| header can support two USB 3.0 |
| ports. |
Front Panel Audio Header | This is an interface for the front |
panel audio cable that allows | |
(see p. 2, No. 23) | convenient connection and |
| control of audio devices. |
1.High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system.
2.If you use AC’97 audio panel, please install it to the front panel audio header as below:
A.Connect Mic_IN (MIC) to MIC2_L.
B.Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C.Connect Ground (GND) to Ground (GND).
D.MIC_RET and OUT_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel.
E.To activate the front mic.
For Windows® 8 / 8
Chassis Intrusion Header | This motherboard supports |
CASE OPEN detection feature | |
(see p.2, No. 28) | that detects if the chassis cover |
| has been removed. This feature |
| requires a chassis with chassis |
| intrusion detection design. |
11
English
ASRock