ASRock FM2A55M-VG3 manual Chassis Speaker Header

Page 26

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assign-ments are matched correctly.

Chassis Speaker Header

Please connect the chassis

(4-pin SPEAKER 1)

speaker to this header.

(see p.13 No. 15)

 

Chassis Fan Connector

(4-pin CHA_FAN1)

FAN_SPEED_CONTROL

CHA_FAN_SPEED

(see p.13 No. 21)

+12V

GND

Please connect the fan cable to the fan connector and match the black wire to the ground pin.

CPU Fan Connector

FAN_SPEED_CONTROL

(4-pin CPU_FAN1)

CPU_FAN_SPEED

(see p.13 No. 2)

+12V

GND

 

 

1 2 3 4

Please connect the CPU fan cable to the connector and match the black wire to the ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

Pin 1-3 Connected

3-Pin Fan Installation

26

Image 26
Contents FM2A55M-VG3 Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Support CD ConnectorBios Feature HardwarePage ASRock Instant Boot Unique FeaturesASRock Extreme Tuning Utility Axtu ASRock Instant FlashASRock XFast LAN ASRock APP ChargerASRock XFast USB ASRock XFast RAMASRock OMG Online Management Guard ASRock Crashless BiosASRock Easy RAID Installer ASRock Internet FlashASRock X-Boost ASRock Fast BootASRock Interactive Uefi ASRock Restart to UefiMotherboard Layout FM2I/O Panel LAN Port LED IndicationsInstallation Pre-installation PrecautionsCPU Installation Installation of CPU Fan and HeatsinkInstallation of Memory Modules Dimm Installing a DimmPcie Slots Installing an expansion cardExpansion Slots PCI and PCI Express Slots What does an AMD Dual Graphics system include? AMD Dual Graphics Operation GuideEnjoy the benefit of AMD Dual Graphics AMD Vision Engine Control Center Multi Monitor Feature Page Jumpers Setup DescriptionOnboard Headers and Connectors Serial ATA2 ConnectorsFront Panel Audio Header Chassis Speaker Header ATX Power Connector Please connect an ATX power supply to this connectorWhat is Hot Swap Function? Serial ATA2 SATA2 Hard Disks InstallationWhat is Hot Plug Function? Hot Plug and Hot Swap Functions for Serial ATA2 SATA2 HDDsSATA2 HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a SATA2 HDD How to Hot Unplug a SATA2 HDDUse RAID Installation Guide to set RAID configuration Driver Installation GuideSet up Uefi Page Introduction Uefi Menu BarNavigation Keys + / Tab Enter Pgup Pgdn Home Navigation KeysMain Screen F10 F12OC Tweaker Screen Boost Frequency Multiplier Dram Timing Configuration Dram FrequencyMultiplier/Voltage Change CPU Frequency MultiplierDram Timing Control Dram Slot Power Down EnableVoltage Configuration Dram Voltage Dram Timing ControlAdvanced Screen Package C6 Mode CPU ConfigurationCore C6 Mode Cool ‘n’ QuietShare Memory North Bridge ConfigurationPrimary Graphics Adapter Dual GraphicsFront Panel South Bridge ConfigurationOnboard HD Audio Onboard LANEasy RAID Installer Storage ConfigurationSata Mode Sata ControllerAcpi Configuration Acpi Hpet table Legacy USB Support USB ConfigurationUSB 2.0 Controller Sound Effect Uefi Update Utility Instant FlashTool System BrowserInternet Flash Network Configuration Internet SettingDehumidifier CPU Fan Setting Uefi Download ServerWould you like to save current setting user defaults? Hardware Health Event Monitoring Screen Boot From Onboard LAN Boot ScreenFast Boot Setup Prompt TimeoutFull Screen Logo Boot Failure GuardBoot Failure Guard Count AddOn ROM DisplaySecure Boot Security ScreenSave Changes and Exit Load Uefi DefaultsExit Screen Discard Changes and ExitRunning The Support CD Install Operating SystemSupport CD Information Drivers MenuInstalling OS on a HDD Larger Than 2TB Installing OS on a HDD Larger Than 2TB in RAID Mode Drv4E CtrlB5 LangengChoose Usable Physical Drive List to select Raid HDD Page Windows VistaTM 64-bit Page Windows 8 64-bit / 7 64-bit