ASRock Version 2.3 CPU Configuration, CPU Host Frequency, Boot Failure Guard, Spread Spectrum

BIOS SETUP UTILITY

Main Advanced H/W Monitor Boot Security Exit

Advanced Settings

WARNING : Setting wrong values in below sections may cause system to malfunction.

CPU Configuration

Chipset Configuration

ACPI Configuration

IDE Configuration

PCIPnP Configuration

Floppy Configuration

SuperIO Configuration

USB Configuration

Configure CPU

	Select Screen
	Select Item
Enter	Go to Sub Screen
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Setting wrong values in this section may cause the system to malfunction.

3.3.1 CPU Configuration

BIOS SETUP UTILITY

Advanced

CPU Configuration

CPU Host Frequency		[Auto]
Actual Frequency (MHz)		[200]
Boot Failure Guard		[Enabled]
Spread Spectrum		[Auto]
Ratio Status	Unlocked (Max :17, Min : 14)
Ratio Actual Value		17
Enhance Halt State		[Disabled]
Max CPUID Value Limit		[Disabled]
Intel (R) Virtualization tech.		[Enabled]
CPU Thermal Throttling		[Enabled]
No-Excute Memory Protection		[Disabled]
Hyper Threading Technology		[Enabled]
Intel (R) SpeedStep(tm) tech.		[Auto]

Select how to set the CPU host frequency.

	Select Screen
	Select Item
+-	Change Option
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

CPU Host Frequency

While entering setup, BIOS auto detects the present CPU host frequency of this motherboard. The actual CPU host frequency will show in the following item.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Spread Spectrum

This item should always be [Auto] for better system stability.

Ratio Status

This is a read-only item, which displays whether the ratio status of this motherboard is “Locked” or “Unlocked”. If it shows “Unlocked”, you will find an item Ratio CMOS Setting appears to allow you changing the ratio value of this motherboard.

4 5