CPU Quiet Fan
This item allows you to identify the temperature of CPU fan. If you set this option as [Disabled], the CPU fan will operate in full speed. If you set this option as [Enabled], you will find the items “Target CPU Temperature
( 
C)”, “Tolerance ( 
C)”, and “Minimun Fan Speed” appear to allow you adjusting them. The default value is [Disabled]. You are allowed to enable this function only when you install
Target CPU Temperature ( 
C)
The target temperature will be between 45 
C and 65 
C. The default value is [50].
Tolerance ( 
C)
The default value of tolerance is [2], which means the error of the target CPU temperature will be within 2 
C.
Target Fan Speed
Use this option to set the target fan speed. You can freely adjust the target fan speed according to the target CPU temperature that you choose. The default value is [Fast]. Configuration options: [Fast], [Middle] and [Slow].
3.5 Boot Screen
In this section, it will display the available devices on your system for you to config- ure the boot settings and the boot priority.
BIOS SETUP UTILITY
Main | Advanced | H/W Monitor |
Boot
Security Exit
Boot Settings
Boot Settings Configuration
1st Boot Device | [1st Floppy Device] |
2nd Boot Device | [HDD: PM - HDS722580VL] |
3rd Boot Device | [CD / DVD: 3S - CD - ROM C] |
Hard Disk Drives |
|
Removable Drives |
|
CD/DVD Drives |
|
Configure Settings during System Boot.
| Select Screen |
| Select Item |
Enter | Go to Sub Screen |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
5 6