BIOS Setup
▶ Internal PLL Overvoltage
This item are used to adjust the PLL voltage.
▶ EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of the microprocessor whether the computer is running on battery or AC power. This field will appear after you installed the CPU which supports speedstep technology.
▶ IntelTurbo Boost
This item will appear when you install a CPU with Intel Turbo Boost technology. This item is used to enable/ disable Intel Turbo Boost technology. It can scale processor frequency higher dynamically when applications demand more performance and TDP headroom exists. It also can deliver seamless power scalability (Dynamically scale up,
▶ OC Genie Button Operation
This field is used to enable/ disable OC Genie function. ▶ DRAM Frequency
This item allows you to adjust the DRAM frequency. Please note the overclocking be- havior is not guaranteed.
▶ Adjusted DRAM Frequency
It shows the adjusted DRAM frequency.
▶ DRAM Timing Mode
Select whether DRAM timing is controlled by the SPD (Serial Presence Detect) EE- PROM on the DRAM module. Setting to [Auto] enables DRAM timings and the following “Advanced DRAM Configuration”
▶Advanced DRAM Configuration Press <Enter> to enter the
▶ Command Rate
This setting controls the DRAM command rate. ▶ tCL
This controls the CAS latency, which determines the timing delay (in clock cycles) before SDRAM starts a read command after receiving it.