▶ USB Devices:
It shows the type of installed USB device. ▶ USB Controller
This item allows you to enable/ disable the USB 2.0 controller. ▶ Legacy USB Support
Select [Enabled] if you need to use a USB
▶ Onboard USB 3.0 Controller
This item allows you to enable/ disable the USB 3.0 controller. ▶ USB 3.0 Legacy Mode Support
Select [Enabled] if you need to use a USB
▶ Super IO Configuration
Press <Enter> to enter the
▶Serial(COM) Port 0 Configuration Press <Enter> to enter the
▶Serial (COM) Port0
This item allows you to enable/ disable the serial port.
▶ Serial (COM) Port0 Settings
Select an address and corresponding interrupt for the serial port.
▶Parallel(LPT) Port Configuration Press <Enter> to enter the
▶Parallel (LPT) Port
This item allows you to enable/ disable the parallel port.
▶ Parallel (LPT) Port Settings
Select an address and corresponding interrupt for the parallel port.
▶ Device Mode
Select a device mode for parallel port.