MSI P67A-GD55 (B3) manual Ix C Append

MS-7681

Creating Virtual Disks

This topic describes the procedure for creating virtual disks by using the Marvell BIOS setup utility.

1.In the Topology pane, scroll to [HBA 0: Marvell 0] and press Enter. A menu pops-up as shown below. Select “Configuration Wizard” and press Enter to begin creating the virtual disk.

Marvell BIOS Setup (c) xxxx Marvell Technology Group Ltd.

Topology			Information
HBA 0: Marvell 0			Vendor ID	:	1848
Virtual Disks		[Configuration Wizard]		:	91xx
Free physical	Disks[Int13: Enable]		Revision ID	:	81
PD 0: ST3750330MS			BIOS Version	:	1.0.0.1008
PD 8: ST3750330MS			Firmware Version	:	2.1.0.1316
				:	5.0Gbps
			PCIe Speed Rate
			Configure SATA as :		AHCI Mode

Help

Select free disks to create array and continue to create virtual disk on this array.

ENTER: Operation F10: Exit/ Save ESC: Return

2.Press Space to select the disk, use the arrow keys to scroll the list of free disks. After select the required disks as shown below, press Enter to continue.

Marvell BIOS Setup (c) xxxx Marvell Technology Group Ltd.

Configure -> Select free disks

ix C Append

HBA 0: Marvell 0

Virtual Disks

Free physical Disks

*PD 0: ST3750330MS

* PD 8: ST3750330MS

Help

Port ID	:	1
PD ID	:	8
Type	:	SATA PD
Status	:	Unconfigured
Size	:	953869MB
Feature Support	:	NCQ 6G 48Bits
Current Speed	:	6G
Model	:	ST37503330MS
Serial	:	ST-XXXXXX
FW Version	:	05.01D05

Select free disks to create array and continue to create virtual disk on this array.

ENTER: Operation F10: Exit/ Save ESC: Return

C-3