AMD RAID
Installing the RAID Driver (for bootable RAID Array)
1� After you complete the RAID BIOS setup, boot from the Windows CD, and the Win- dows Setup program starts.
2� Press F6 and wait for the Windows Setup screen to appear.
3� Insert the floppy that contains the RAID driver, press the “S” key to select “Specify Additional Device”.
Note: for Windows Vista/ Windows 7, you can copy the files to a medium (floppy/ CD/ DVD or USB)
Important
Please follow the instruction below to make a SATA RAID driver for yourself.
•Insert the MSI DVD into the
•Click the “Browse CD” on the Setup screen.
•Copy all the contents in the : \\ChipSet\AMD\Packages\Drivers\SBDrv\SB9xx\RAID\ (and then, please select a folder which was classified according to OS.)
•The driver disk for RAID controller is done.
4� When prompted, insert the medium disk and press Enter. For Windows Vista/ Windows 7:
During the Operating system installation, after selecting the location to install Vista/ Windows 7 click on “Load Driver” button to load RAID drive.
5� You should be shown a list of available RAID controller(s).
6� Select the compatible RAID controller for
| press ENTER. |
� | The next screen should confirm that you have selected the RAID controller. Press |
| ENTER again to continue. |
� | You have successfully installed the RAID driver, and Windows setup should con- |
| tinue. |
9� Leave the medium until the system reboots itself. Windows setup will need to copy the files from the medium again after the RAID volume is formatted, and Windows setup starts copying files.