MSI Big Bang-XPower II manual Installing Memory Modules

MS-7737

Installing Memory Modules

1.Unlock the DIMM slot by pushing the mounting clip to the side. Vertically insert the memory module into the DIMM slot. The memory module has an off-center notch on the bottom that will only allow it to fit one way into the DIMM slot.

2.Push the memory module deep into the DIMM slot. The plastic clip at side of the DIMM slot will automatically close when the memory module is properly seat and an audible click should be heard.

3.Manually check if the memory module has been locked in place by the DIMM slot’s side clip.

Chapter 1

Notch

Volt

1-17