MS-7528 Mainboard
Front USB Connector: JUSB1 ~ 2
These connectors, compliant with Intel® I/O Connectivity Design Guide, is ideal for connecting
|
|
| Pin Definition |
| ||
| JUSB1~2 | PIN | SIGNAL | PIN | SIGNAL | |
| 1 | VCC | 2 | VCC | ||
2 | 10 | |||||
3 | USB0- | 4 | USB1- | |||
1 | 9 | |||||
|
| 5 | USB0+ | 6 | USB1+ | |
|
| 7 | GND | 8 | GND | |
|
| 9 | Key(no pin) | 10 | USBOC | |
USB 2.0 Bracket
(Optional)
Important
Note that the pins of VCC and GND must be connected correctly to avoid possible damage.
Serial Port Connector: JCOM 1
This connector is a 16550A high speed communication port that sends/receives 16 bytes FIFOs. You can attach a serial device.
|
|
| Pin Definition | |
|
| PIN | SIGNAL | DESCRIPTION |
|
| 1 | DCD | Data Carry Detect |
| JCOM1 | 2 | SIN | Serial In or Receive Data |
2 |
| 3 | SOUT | Serial Out or Transmit Data |
| 4 | DTR | Data Terminal Ready | |
1 | 9 | 5 | GND | Ground |
|
| 6 | DSR | Data SetReady |
|
| 7 | RTS | Request To Send |
|
| 8 | CTS | Clear To Send |
|
| 9 | RI | Ring Indicate |