To disable the function, press the + and – sen- sors at the same time for several seconds until you hear a beep.
Caution
In the event of a power failure, your electronic clock settings will be erased and 12:00 will flash on the clock display. Reset the clock and programme again.
Teka Hydroclean® Cleaning function
With this function, any grease or dirt that is stuck to the walls of the oven can easily be removed through the combined action of steam and the excellent properties of the new Teka Hydroclean® enamel.
Thanks to the new Teka Hydroclean® techno- logy, the oven does not need to be cleaned with a grease removal product. When the water and dirt are removed, the walls of the oven are clean and
How to use the oven cleaning cycle
Always use the cleaning programme with a cold oven. Running it with a hot oven may have adverse effects.
1.First remove the trays and all accessories from the oven interior, including the tray supports and telescopic guide rails.
Caution
Do not clean the oven and tray at the same time using the Teka Hydroclean® function as you will not obtain good results. To clean the tray, follow the instructions provided later on.
2.With the oven cold, pour 250 ml of water into the bottom of the oven cavity.
3. Turn the control dial to position | . |
4.You will hear a beep indicating that the Teka
Hydroclean® cycle has started. Symbol
will flash slowly and the time remain- ing to complete the cycle will appear on the
display.
IMPORTANT
The duration of this cycle cannot be changed. To stop the cycle before it is finished, turn the control dial to position 
.
22